More Functions - Sanyo HV-DX3E Instruction Manual

More Functions

The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Clock / counter display
Each time you press [DISPLAY] button,
1x: Time and date+current status
2x: Counter+current status
3x: disappear.
• If didn't wind tape (PLAY, FF, REW,...), it doesn't appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal , press the button
to display the VPS/PDC icon.
Remaining time and cassette length
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/-:SELECT
OK:CONFIRM SETUP:END
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
this function until you reach the correct length.
Searching a recorded programme with index
When you record a programme, the VCR places an index mark at the start
of the recording.
To search fo an index mark
1. Call the player's "SETUP", choose "TAPE CONTROL"
2. Choose index + to search forward or index - to search backward.
The VCR will locate your index mark and begin playback.
30
Time and date
counter
TAPE REMAIN
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM SETUP:END
STOP SP
14:00 08/08
Call the player's "SETUP",
choose "TAPE CONTROL"
• Remaining time display is
only possible when the
E-240 01:27 cassette is loaded.
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/- :SELECT
OK:CONFIRM
PR01 ARD
STEREO ON
V E180 00:48
SETUP:END