Sanyo HV-DX3E Instruction Manual page 30

Timer Review – changing and erasing
1
2
Call the player's "SETUP",
choose "TIMER PROGRAM".
Select the programming to change or erase.
If you want to erase this programming press
button [0], confirm with OK.
If you wish to make changes:
Move to the position you want to change using the
[œ œ /√ √ ] buttons.
Change the settings using the [PR +/–] or
[number] buttons.
If all settings are ok, press [œ œ or √ √ ], until you see
"OK: CONFIRM" in the bottom line.
Confirm changes with [OK]. Exit the menus.
Timer Recording
TIMER PROGRAM
PR START END DATE
03 21:20 22:20 14/08
01 18:10 20:30 20/08
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
PR+/-:SELECT
OK:CONFIRM SETUP:END
TIMER PROGRAM (ONCE)
PR 03
START TIME 21:20
END TIME 22:20
START DATE 14/08(SAT)
TAPE SPEED SP
VPS/PDC ON
0 :ERASE
/ :CORRECT SETUP:END
29