Tuning In New Stations - Sanyo HV-DX3E Instruction Manual

Tuning in New Stations

The TV and player are switched on.
To see the picture from your player, press the input or AV (Audio/Video) button on the TV.
Tuning
To complete the set-up of your video recorder when the
1
auto set has not stored all of the channels or when you wish
to store a new channel.
Call the video's "SETUP", choose "PR PRESET".
Select "MANUAL SET".
2
Choose any unused programme number "----" or "P-xx" ...
3
It's best to use the same programme number on both the TV
and video.
... and confirm by selecting "OK" button.
Set the station you want:
4
• the programme number;
• the broadcast system you want (Aerial(CH) or
Cable(CC)),
• You can directly enter the real channel number with the
[0 to 9] buttons, or search by pressing [œ œ /√ √ ],
• The fine tuning you can adjust,
• When the programme is encoded (and you have a
decoder connected to socket EURO AV2), press the [œ œ or
√ √ ] to select ON or OFF.
• Change or create the station name.
Once you see the station you want, store it by selecting OK.
5
Tune in further stations (from step 3 onwards) or exit
tuning mode.
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
PR+/-:SELECT
OK:CONFIRM SETUP:END
MANUAL SET
PR01 P-O1 PR08 P-08
PR02 P-02 PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 P-05 PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
MANUAL SET
PR 04
RECEPTION AERIAL
AUTOSEARCH CH_ _
FINE TUNING
DECODER ON
NAME _ _ _ _
PR+/-: UP/DOWN
/
: SELECT
OK:CONFIRM SETUP:END
MANUAL SET
PR 03
RECEPTION AERIAL
AUTOSEARCH CH 03
FINE TUNING
DECODER ON
NAME _ _ _ _
PR+/-: UP/DOWN
/
: SELECT
OK:CONFIRM SETUP:END
MANUAL SET
PR 03
RECEPTION AERIAL
AUTOSEARCH CH_ _
FINE TUNING
DECODER ON
NAME _ _ _ _
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM SETUP:END
25