Sanyo HV-DX3E Instruction Manual page 27

Tuning in New Stations
Station names
If your player is showing no station name or is showing a station name incorrectly, you can correct
this.
Sorting programme locations
If the location numbers used for programmes stored in your TV and player are different, you can change them on
the player. To do this, move the stations to the right numbers, until they are arranged the way you want.
Clearing programme locations
26
Call this menu (just see the previous page),
1
if it isn't displayed.
Select NAME position.
Press the [0] button to change the given name.
Or press the [1] button to create the station name.
Either select the name from the stored list or you
2
create the station name and enter a 4-digit name.
Change the letters with the [PR +/–] buttons,
move to the next letter with the [œ œ /√ √ ] buttons.
3
Store and exit.
1
1
Call the player's "SETUP",
choose "PR PRESET" then "PR ALIGN".
2
2
Select the programme to swap.
Confirm by pressing OK button.
Move the station to the desired location number.
Confirm by pressing OK button.
1
1
Call the player's "SETUP",
choose "PR PRESET" then "PR ERASE".
2
2
Select the station (location number) you want to clear.
Review the picture by pressing [œ œ ] button.
Clear by pressing OK button.
MANUAL SET
PR 01
RECEPTION AERIAL
AUTOSEARCH CH01
FINE TUNING
DECODER ON
NAME _ _ _ _
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM SETUP:END
MANUAL SET
PR 01
RECEPTION AERIAL
AUTOSEARCH CH_ _
FINE TUNING
DECODER ON
NAME O_ _ _
PR+/-: SELECT CHARACTER
/
: SELECT POSITION
OK:CONFIRM SETUP:END
MANUAL SET
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
PR ALIGN
PR01ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM SETUP:END
PR ERASE
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
:PR VIEW
OK:ERASE SETUP:END