Fax Parameter Table - Panasonic UF-580 Service Manual

Fax Parameter Table

No. Parameter
01 CONTRAST
02 RESOLUTION
04 STAMP
05 MEMORY
06 DIALING METHOD
07 HEADER PRINT
08 HEADER FORMAT
09 RCV'D TIME PRINT
10 KEY/BUZZER
VOLUME
12 COMM. JOURNAL
13 AUTO JOURNAL
PRINT
17 RECEIVE MODE
Setting
Setting
Number
*1 Normal
2 Lighter
3 Darker
*1 Standard
2 Fine
3 S-Fine
4
Halftone
(Fine)
5
Halftone
(S-Fine)
*1 Off
2 On
1 Off
*2 On
1 Pulse
*2 Tone
*1 Inside
2 Outside
3 No print
*1 Logo, ID No. Selecting the header format.
2 From To
*1 Invalid
2 Valid
1 Off
*2 Soft
3 Loud
1 Off
2 Always
*3 Inc. only
1 Invalid
*2 Valid
1 TEL
*2 FAX
3 FAX/TEL
SW.
4 TAM/FAX
259
Comments
Setting the home position of the CONTRAST key.
Setting the home position for the RESOLUTION.
Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
F8-9 (MEMORY XMT))
Selecting the dialing method.
Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received page.
Selecting the volume of the Key/Buzzer tone.
Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
Off : Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
Selecting whether the machine prints the journal
automatically after every 32 transactions.
Setting the receive mode.