Using The Phonebook - Uniden XDECT 7055 Owner's Manual

Caller ID menu options
Open the CID list with the phone in standby. Find the number you
want and press
Delete Entry
Store Into Pb
Delete All
Add Call Block
Using Call Waiting
If you get a Call Waiting call, the phone sounds a tone and displays
any CID information received for the waiting call.
For Australian Model:
Press
TALK ( )/FLASh
press 2 to accept the waiting call. The first caller is put on hold, and
you will hear the new caller after a short pause. To return to the
original caller, press
For New Zealand Model:
Press
TALK ( )/FLASh
the waiting call. The first caller is put on hold, and you will hear the
new caller after a short pause. To return to the original caller, press
(
TALK ( )/FLASh FLASh

Using the Phonebook

Each station can store up to 70 entries in its phonebook.
Open/close the phonebook
Scroll through the entries
Jump to entries that start
with a certain letter
Dial an entry
14
. Choose one of these CID menu options:
MENU/sElECT
Erase this Caller ID number.
Add this number to this station's phonebook. The phone
prompts you to enter a name & edit the number; handsets
also prompt you to choose a personal ring.
Erase this station's CID list. (This does not affect the CID
lists saved on any other stations.)
(Handset only) Add the number to the call block list (see
page 16). To add the number to the call block list from the
base, press
BLOCK
on the handset (or
TALK ( )/FLASh
on the handset (or
on the base1 again.
Press
Press
from A to Z or
Press the number key corresponding to the
letter you want to jump to.
1.
2.
instead of entering the menu.
FLASh
( on the base1 and then 2 again.
FLASh
FLASh
PhONEBOOK.
to scroll through the phonebook
DOWN
to scroll from Z to A.
UP
Find the entry you want to dial.
On the handset, press
; on the base, press
SPEAKEr
on the base1 and then
on the base1 to accept
TALK ( )/FLASh
SPEAKEr
or
.