Phonebook - Uniden DCT5260 Owner's Manual

DCT5260_OM 10/1/02 5:31 PM

Phonebook

Phonebook allows you to dial a number using just a few key presses.
Your phone stores names/numbers in the phonebook memory location, and you can
search names in alphabetical order. You have a total of 100 locations that can be used
for the phonebook (including the Speed dials) and Caller ID messages.
• If any of the following occurs during a phonebook operation, the operation will be canceled.
-Press end. The phone will return to the standby mode (or the call will be disconnected).
-Press talk/flash or speaker.
-Receive an outside/intercom call or page.
-Charge the handset
-Receive a CIDCW (Caller ID on Call Waiting) (during a call only).
• If the handset remains idle for 30 seconds, the phone will return to the standby mode (or
back to the call).
Storing Phone Numbers, Names, Distinctive
Rings, and Speed Dial
1) When the phone is in the standby mode, press the CID RDL PB soft key.
L M
2) Press or to move pointer to "Phonebook", then press OK soft key.
The handset displays the following items:
(1st line) The number of the phonebook locations used
(2nd line) How to search (press the number keypad,
(3rd line) How to enter the storing operation (press the STORE soft key)
(4th line) The BACK and the STORE soft keys.
Page 33
L
or
M
)
P h o n e b o o k : 1 0 0
S e a r c h [ A - Z / / ]
S t o r e [ S T O R E ]
BACK BACK STORE
P H O N E B O O K [ 33 ]