Using The Handset Menus - Uniden XDECT 7055 Owner's Manual

Using the handset Menus

Handset Setup
You can change these settings separately for each handset.
T-coil
Ringer Tones
Personal Ring
Autotalk
Any Key Answer
Banner
Key Touch Tone
Ans. Setup
This menu controls the options and settings for your answering
system (see "Ans. Setup menu options" on page 201.
Day & Time
You need to set the day & time so messages get the right time stamp.
11 Use &
Up
21 Use the number keypad to enter the hour and minutes.
31 Use &
Up DoWN
Global Setup
The settings on this menu apply to all handsets and the base. Before
changing these settings, make sure the phone is in standby and all
handsets are within range of the base. (Only one handset at a time
can change these settings.1
Set Line Do not change this setting unless instructed to by customer
Mode service.
This feature adds "0" or "00" at the beginning of the number
Insert 0 received from Caller ID. The default setting for New Zealand is
ON. The default setting for Australia is OFF.
10
Turn on T-coil mode to reduce noise on some hearing
aids (see "Do you use a T-coil hearing aid?" on page 26).
Choose one of four melodies or four tones for the
handset's main ring tone. As you highlight each ring
tone, the phone plays a sample of the tone. When you
hear the tone you want, press
Turn on the personal ring feature. If you have Caller ID,
this feature lets you assign special ring tones to anyone
in your phonebook: this handset will use the special
ring tone when that person calls.
Turn on Auto Talk so you can answer the phone just by
picking up the handset from the cradle (without having
to press any buttons).
Turn on Any Key Answer so you can answer the phone
by pressing a key on the twelve-key dial pad.
Change the name used on the handset's display.
Have the keypad sound a tone when you press a key.
to choose the day of the week; press
DoWN
to select AM or PM; press
.
MENU/SELECT
MENU/sElECT
.
MENU/sElECT
.