Parameter Clear - Mitsubishi Electric FR-PU07 Instruction Manual

3.2.5

Parameter clear

You can perform the "parameter clear" and "all parameter clear".
Switch to the PU operation mode before performing any operation.
Clear Pr. .......................... Returns (initializes) the parameters to the factory settings with the exception of
•
Clear All........................... Initializes all parameters with the exception of Pr. 75.
•
(1) Parameter clear
1
Press .
The function menu is called.
2
Using , move the
/
cursor to "4 Pr. Clear".
3
Press .
The parameter menu
appears.
4
Select the "Clear Pr.".
/ , move the
Using
cursor to "1" and press the
.
the some parameters (Pr. 75 and calibration values in Pr. 900 to 905 ).
1 MONITOR
2 PU Oper
3 Pr.List
4 Pr.Clear
1 MONITOR
2 PU Oper
3 Pr.List
4 Pr.Clear
1 Clear Pr.
2 Clear All
1 Clear Pr.
2 Clear All
Operation Procedures for Functions
5
"Clear Pr." is selected, and
the confirmation screen for
clearing execution is
displayed.
6
Press .
The parameters are
initialized.
When canceling the
initialization, press
the confirmation screen.
Clear Pr.
Exec<WRITE>
Cancel<ESC>
Clear Pr.
COmpleted COmpleted
on
65
3