Mitsubishi Electric FR-PU07 Instruction Manual page 86

• Reading the parameter settings of the inverter
and storing them to FR-PU07.
1
Connect the FR-PU07 to the copy source inverter.
2
Press .
The function menu appears.
3
Select the "PRCpy set".
/
Using , move the
cursor to "12 PRCpy set" and
press .
4
Select the copy area.
The copy area selection
screen is displayed. Then,
move the cursor to any one of
1 to 3 and press .
(Parameter settings of each
inverter (three inverters in
total) can be copied to the
area 1, 2 or 3.)
5 Select the "READ".
Using , move the
/
cursor to "1 Read VFD" and
press .
1 MONITOR
2 PU Oper
3 Pr.List
4 Pr.Clear
9 S/W
10 Selectop
11 Option
12 PRCpy set
1 Copy area 1
2 Copy area 2
3 Copy area 3
Copy area 1
1 Read VFD
2 Write VFD
3 Verifing
Operation Procedures for Functions
6
Give a name.
You can name each of copy
Select the
areas 1 to 3.
characters with /
.
and set them with
Press to set the name for
area
the .
7
Write to the copy area of
FR-PU07.
The screen for confirming the
overwriting of the data in the
FR-PU07 is displayed.
8
Press .
The parameter settings of the
inverter are stored.
When canceling, press
.
Name:012
:Select Char
READ:Decide Char
WRITE:DecideName
012
Overwrite area 1
WRITE:Executing
ESC:Cancel
Param Copy
Reading Reading
Completed
3
77