Flash Hook; Group Blf; Park And Page; Ringer Off - Avaya 960 Series User Manual

16.2.12 Flash Hook

A button configured for this action will send a flash hook signal to a currently connected analog line.

16.2.13 Group BLF

A button can be programmed to indicate if there are any calls to a group waiting to be answered. A red flashing lamp
indicates that there are calls waiting for the hunt group. Press the button to pickup the longest waiting call.
16.2.14 Page
A button configured with this action can be used to make a page call.
The button can be configured with the target user or group for the page. If configured without a number, pressing the
button will display a menu for number entry before making the page call.

16.2.15 Park and Page

If your system administrator has configured your system for
park calls and announce the parked call to other users.

16.2.16 Ringer Off

A button configured with this action can be used to turn your phone's ringer on or off.
When you turn the ringer off the visual alerting is also turned off. When the ringer has been turned off, the button's red
lamp is lit. Pressing the button again will turn the ringer on.

16.2.17 Self Administer

A button configured for this action can be used to access the

16.2.18 Send All Calls

A button configured with this action can be used to switch
button's red lamp is lit or a red warning icon is displayed. Pressing the button again turns 'do not disturb' off.

16.2.19 Suppress Digits

Masks the display of digits as you dial them on the phone. Dialed digits are replaced with an s character. The button is
used to switch the suppression on/off. When 'suppress digits' has been set, the button's red lamp is lit. Pressing the
button again cancels the suppression.
· If en-block dialing is active you will see the digits as you dial them. When you make the call the digits will be
26
suppressed.
· When the option to suppress digits is used, the call is not recorded in the call log.

16.2.20 Twinning

A button configured for this feature allows you to control your phone's mobile twinning operation. This is only useable if
your system administrator has configured you for mobile twinning.
· If pressed when the phone is idle, the phone displays the
switch mobile twinning on/off and to setting the twinned destination.
· If pressed while a twinned call is connected to the twinned destination, the system attempts to reclaim the call.
· If pressed while connected to a call on the phone, the system attempts to transfer the call to the twinned
destination. You do not need twinning switched on to use this feature.

16.2.21 User BLF

This type of button can be used to monitor the status of another user. The lamp's state will indicate the status of the
user.
· Off = Available
Pressing the button will make a call to the user. In addition to calling the user, you can use the user button to
transfer calls to the user or to start a conference with the user.
· Slow Flash = Ringing
Pressing the button will display options to pickup the call.
· Fast Flash = On a Call
Pressing the button will display a number of options:
· Call - Call the user.
· Message - Cause a single burst of ringing on the user's phone. They will also see the message "Please Call"
followed by your extension number.
· Voicemail - Call the user's voicemail mailbox to leave a message.
9600 Series User Guide
IP Office 9.0
Park & Page , this button allows you to use the feature to
42
Self Administer menu.
108
'do not disturb ' on or off. When 'do not disturb' is on, the
96
mobile twinning menu . You can use the menu to
98
Issue 08b (10 April 2014)
Page 110