How To... Replace The Membrane Switch And Module Buttons - Life Fitness T3 Service Manual

Life Fitness T-Series Consumer Treadmills

How To... Replace The Membrane Switch and Module Buttons

Tools Required: Phillips Screwdriver
1. 1. 1. 1. At the power switch, turn OFF the
unit, then unplug the line cord at the
wall outlet.
2. Remove the console.
3. Disconnect the ribbon cable.
4. Remove two(2) screws from the
back of the module buttons.
5. Remove the back of the cover and
disconnect membrane from main
console.
6. Remove the membrane switch.
7. Install the new membrane switch
and the module buttons in reverse
order.
18
Module
Buttons
Membrane
Switch
Section 3