Life Fitness T-Series Consumer Treadmills
How To... Replace The Leveler Assembly
Tools Required: 6" level and open end wrench set
REMOVAL AND INSTALLATION
1. At the power switch, turn OFF the unit, then
unplug the line cord at the wall outlet.
2. Tilt the unit over on its side.
3. Loosen the jam nut.
4. Remove the adjusting leveler by turning it
counterclockwise.
5. 5. 5. 5. Install new adjusting leveler in reverse order.
Make sure to level the unit at the rear
roller. Lay at least a 6" level across the rear roller. With the unit level, secure the jam nut up against the
leveler frame.
14
Leveler
Section 3
Jam nut