Download
Share
Print this page
Life Fitness T35 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Life Fitness Manuals
  4. Treadmill
  5. Treadmill T3.5
  6. Assembly instructions manual

Life Fitness T35 Assembly Instructions Manual

Life fitness treadmill assembly instructions
Hide thumbs Also See for T35:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: User Manual
T3
Treadmill
5
A S S E M B L Y
I N S T R U C T I O N S
T3
Treadmill
5
A S S E M B L Y
I N S T R U C T I O N S

Advertisement

loading

Related Manuals for Life Fitness T35

Summary of Contents for Life Fitness T35

  • Page 1 Treadmill A S S E M B L Y I N S T R U C T I O N S Treadmill A S S E M B L Y I N S T R U C T I O N S...
  • Page 2 Congratulations... Life Fitness and welcome to the world of and the Life Fitness T3 treadmill. The following Parts Identification Listing and the step by step assembly procedures have been assembled to make the set-up of this treadmill as quick and easy as possible.

  • Page 3: Important Safety Instructions

    MPORTANT AFETY DO NOT ⇒ position the rear of the treadmill within 6 feet ( 2 meter ) of the nearest obstruction. The sides of the treadmill should maintain a minimum clearance of 8 inches ( 20 cm ) from the nearest treadmill or other obstruction.

  • Page 4: Parts Description

    OOLS EQUIRED FOR SSEMBLY... 5/32” Hex Key Wrench (provided), 9/16” Combination Wrench, Phillips Screwdriver USER LEFT UPRIGHT 7966701 DISPLAY CONSOLE ASSEMBLY TOP HANDRAIL SPACER 7127201 MOUNTING SCREW (LONG) 1/4 - 20 x 4.25” 3207701 HANDRAIL CROSSBAR 7966101 MOTOR COVER SCREW 6-20 x .38 3207501 UPPER HANDRAIL COVER...
  • Page 6 DO NOT DISCARD THE SHIP KIT LOCATED ON TOP OF THE DECK AND BELT. ALL NECESSARY COMPONENTS NEEDED TO COMPLETE THE INSTALLATION ARE LOCATED IN THE SHIP KIT AND BASE TRAY. Remove the tape securing the MOTOR COVER (A) to the FRAME (B). Carefully lift and remove the MOTOR COVER.
  • Page 7 Locate a BOTTOM HANDRAIL SPACER (#8). Slide the BOTTOM HANDRAIL SPACER onto the bottom of the USER RIGHT HANDRAIL (#4) with the flat side of the BOTTOM HANDRAIL SPACER facing the FRAME (B). Align the two mounting holes in the HANDRAIL, BOTTOM HANDRAIL SPACER, and FRAME and insert two LONG MOUNTING BOLTS (#7) and tighten securely using a 5/32”...

  • Page 8: Pre-Operation Checklist

    Locate the HANDRAIL CROSSBAR (#9). With the bend facing upward and pitched toward the DISPLAY CONSOLE, carefully place the HANDRAIL CROSSBAR between the user LEFT AND RIGHT HANDRAILS (#4) as shown and align the mounting holes. Insert one SHORT MOUNTING BOLT (#6) on either end of the HANDRAIL CROSSBAR and tighten using a 5/32”...