How To... Replace The Handrails And Crossbar - Life Fitness T3 Service Manual

Life Fitness T-Series Consumer Treadmills

How To... Replace The Handrails and Crossbar

Tools Required: Hex key wrench set
REMOVAL AND INSTALLATION
1. At the power switch, turn OFF the unit, then unplug
the line cord at the wall outlet.
2. Remove two(2) short mounting bolts securing the
handrail crossbar and remove the crossbar.
3. Remove six(6) mounting bolts
handrail spacer. Four(4) long and two(2) short .
4. Remove the top handrail spacers.
5. Remove the four(4) long mounting bolts from the
bottom handrail spacers.
6. Remove the spacers and handrails.
7. 7. 7. 7. Install the handlerails and crossbar in
reverse order.
NOTE: Keep all screws loose until all parts are
assembled. Once assembled, then tighten.
20
from the top
Short
Mounting
Bolts(2)
Long Mounting
Bolts (4)
Short
Mounting
Bolts (2)
Long
Mounting
Bolts(4)
Section 3
Top Handrail
Spacer
Handrail
Handrail
Bottom
Handrail
Spacer
Handrail
Crossbar
User Left
Upright
Unit Frame