Pioneer PRO-R06U Training Manual page 40

Attention for US model
NYLON BINDER （BEC1228)
Do not forget to install the Gasket after removing.
Refer to red circles below.
Put the shield cord along the top of Front End
and bind with cable ties like the photo.
( For securing the spec of beat noise of display )
Refer to blue arrow
Secure the interspaces between Front-end
and flexible cable like showing photo.
Gasket(ANK1791-A*2)
Cable Tie(AEC2078)
Do not forget to place Rubber Cushion
(AEB1433) after treatment.
40