Sync Det; Sg Mode - Pioneer PRO-R06U Training Manual

2.6. INITIALIZE
Operation item
No.
1

SYNC DET +

2

SG MODE

3 SG PATTERN
4 SIDE MASK LEVEL +
5 FINAL SETUP +
6 SR+
7 UART SELECT
8 CVT AUTO
9 HDMI INTR POSITION +
1. SYNC DET
Exclusively used for technical analsyis (details omitted).
2. SG MODE
SG MODE (SG's route selection)/SG PATTERN (signal pattern selection) are used as pair.
In SG MODE, select the SG route and then select the SG pattern to be sent by the selected route.
In SG MODE, make sure to select the route first.
No.
1 SG OFF
2 DIG MVDEC YCBCR
3 ANA MVDEC YCBCR
4 ANA MVDEC Y
5 ANA AD YCBCR
6 ANA AD RGB
Display
Exclusively used for technical analsyis.
Paired SG_MODE with SG_PATTERN.
Select SG Route.
Paired SG_MODE with SG_PATTERN.
Select SG Pattern.
Configure the color of the side mask.
Initialize flash memorys on virgin product status
Select SR+ mode or UART SELECT mode.
Select boud Rate on RS232C Communication
Exclusively used for technical analsyis.
Figure. SG MODE
Display
SG Mode is OFF.
MAIN VDEC: YCbCr (Digital output mode)
MAIN VDEC: YCbCr (Analog output mode)
MAIN VDEC: Y (Analog output mode: SG VDEC return setting)
AD: YCbCr
AD: RGB
33
Content RS232C
Content
BSL
GSL
RSL
FST