1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Receiver
  5. PRO-700HD
  6. Service manual

Pioneer PRO-700HD Service Manual

Projection monitor receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PROJECTION MONITOR RECEIVER
PRO-700HD
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
PRO-700HD
KUXC/CA
• The PRO-700HD service manual is composed of ORDER NO. ARP3024 and
ORDER NO. ARP3013. Use these two manuals as one set. For other details,
refer to the separate manual (ORDER NO.ARP3013).
PIONEER ELECTRONIC CORPORATION
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
c
PIONEER ELECTRONIC CORPORATION 1998
Power Requirement
AC120V
CONTENTS
5. PCB PARTS LIST ............................................. 159
6. ADJUSTMENT .................................................. 178
7. GENERAL INFORMATION .............................. 214
7.1 WIRING DIAGRAM .................................... 214
7.2 IC ............................................................... 215
7.3 BLOCK DIAGRAMS .................................. 266
1. SAFETY INFORMATION ...................................... 2
3. SCHEMATIC DIAGRAM ..................................... 22
4. PCB CONNECTION DIAGRAM ........................ 111
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
ORDER NO.
ORDER NO.
ARP3024
Remarks
ORDER NO.
ARP3024
ORDER NO.
ARP3013
O- SZG DEC. 1998 Printed in Japan

Advertisement

Table of Contents
loading

Related Manuals for Pioneer PRO-700HD

Summary of Contents for Pioneer PRO-700HD

  • Page 1: Table Of Contents

    Remarks PRO-700HD KUXC/CA AC120V • The PRO-700HD service manual is composed of ORDER NO. ARP3024 and ORDER NO. ARP3013. Use these two manuals as one set. For other details, refer to the separate manual (ORDER NO.ARP3013). CONTENTS 5. PCB PARTS LIST ..........159 6.
  • Page 2 PRO-700HD...

  • Page 3: Pcb Parts List

    PRO-700HD Mark No. Description Part No. Mark No. Description Part No. 5. PCB PARTS LIST • NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. • mark found on some component parts indicates the importance of the safety factor of the part.
  • Page 4 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. C234 CCCSL221J50 R281 RT10PZ390K C231 -C233 ,C235 ,C263 ,C264 CCCSL221K2H VR201 VRTHS6VS102 VR202 VRTHS6VS471 C213 -C219 ,C230 ,C246 ,C247 CEHAT100M50 Other Resistors RD1/4PU&&&J C250 CEHAT100M50 OTHERS C220 ,C251 CEHAT101M10...
  • Page 5 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. D1239 -D1242 ,D1244 ,D1246 -D1248 1SS254 C1009 ,C1010 ,C1141 -C1144 ,C1171 CKCYF103Z50 D921 -D924 ,D926 -D929 1SS254 C1174 ,C1206 ,C1217 ,C1228 ,C1239 CKCYF103Z50 D934 -D936 ,D938 -D941 1SS254 C1248 ,C1250 ,C1251 ,C1253 ,C1278 CKCYF103Z50...
  • Page 6 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. OTHERS RESISTORS 1202 ,903 SCREW BBZ30P080FCU R1403 ,R1404 ,R1407 ,R1408 ,R1421 RS1/16S101J CN905 ,CN906 15P PLUG KM200IA15 R1432 -R1436 ,R1457 -R1463 RS1/16S101J CN908 PLUG 10-P KM250MA10 R1467 -R1472 ,R1494 -R1507...
  • Page 7 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. R1671 ,R1696 ,R1704 ,R1712 ,R1720 RS1/16S471J R5007 RS1/16S273J R1728 RS1/16S471J R5010 RS1/16S334J R1441 RS1/16S473J R5008 RS1/16S562J R1760 RS1/16S474J R5004 RS1/2S821J R1423 RS1/16S512J VR5001 VRTS6VS473 &&& R1446 ,R1630 -R1632 ,R1693 -R1695 RS1/16S562J...
  • Page 8 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. R5022 RS1/16S472J C6229 ,C6252 ,C6259 CEV4R7M35 C6019 ,C6025 ,C6030 ,C6035 CEVNPR10M50 OTHERS C6041 ,C6043 ,C6048 CEVR47M50 J5025 3P HOUSING WIRE ADX2494 J5024 3P HOUSING WIRE ADX2499 C6059 ,C6061 CKSQYB332K50...
  • Page 9 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. R6185 ,R6194 ,R6383 ,R6415 RS1/16S221J TUNER u-COM ASSY R6426 ,R6427 ,R6460 ,R6461 RS1/16S221J SEMICONDUCTORS R6009 ,R6010 ,R6041 ,R6050 ,R6051 RS1/16S222J IC2204 24LC32A R6054 ,R6077 -R6082 ,R6137 ,R6138 RS1/16S222J IC2701...
  • Page 10 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. C2241 ,C2252 ,C2254 ,C2260 ,C2265 CEAT101M10 R2744 ,R2745 ,R2750 -R2752 ,R2757 RS1/16S101J C2212 CEAT101M16 R2759 ,R2765 ,R2767 ,R2819 ,R2829 RS1/16S101J C2717 CEAT101M25 R2832 ,R2833 ,R2843 RS1/16S101J C2218 ,C2226 ,C2264 ,C2705 ,C2709 CEAT1R0M50...
  • Page 11 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. R2247 ,R2419 ,R2441 RS1/16S333J Q5288 ,Q5289 ,Q5297 -Q5299 ,Q5302 2SC1740S Q5307 -Q5310 ,Q5313 ,Q5315 -Q5317 2SC1740S R2223 ,R2716 RS1/16S392J Q5319 ,Q5320 ,Q5602 ,Q5603 2SC1740S R2439 ,R2740 ,R2755 RS1/16S393J Q5605 -Q5607 ,Q5610 ,Q5612...
  • Page 12 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. C5292 ,C5632 ,C5634 CEAT470M25 IC7007 ,IC7105 PQ05RD1B C5607 ,C5608 CEAT471M10 IC7106 PQ09RD1B C5618 ,C5622 CEAT471M16 IC7008 ,IC7709 ,IC7803 PQ20VZ1U C5285 ,C5627 CEAT4R7M50 IC7801 PST9146N C5257 ,C5258 ,C5271 ,C5273 ,C5284 CEATR10M50...
  • Page 13 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. C7145 ,C7147 CCSQCH121J50 C7311 -C7317 CFHSP104J16 C7357 CCSQCH180J50 C7810 CFHSP563J16 C7355 CCSQCH181J50 C7804 CFHSQ103J16 C7166 ,C7778 ,C7788 CCSQCH220J50 C7012 ,C7105 ,C7155 ,C7305 CKSQYB103K50 C7806 CCSQCH220J50 C7805 CKSQYB223K50 C7523 ,C7526 ,C7617 ,C7620...
  • Page 14 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. R7415 ,R7535 -R7537 ,R7615 -R7617 RS1/16S101J R7399 ,R7412 ,R7414 ,R7711 ,R7719 RS1/16S272J R7715 ,R7730 ,R7735 ,R7740 ,R7747 RS1/16S101J R7746 ,R7748 ,R7750 RS1/16S272J R7749 ,R7751 ,R7759 -R7761 RS1/16S101J R7140 ,R7143 ,R7191 ,R7336 ,R7339 RS1/16S273J...
  • Page 15 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. IC4202 MC14577CF D4705 ,D4711 1SV232 IC4402 PA0030 COILS AND FILTERS L4004 ATC1037 IC4720 PE6002A9 F4001 -F4004 ,F4401 ,F4402 ,F4404 ATF1124 IC4203 PQ20VZ1U F4703 ,F4704 ATF1124 IC4701 PST9146N F4005 -F4007...
  • Page 16 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. C4009 CCSQCH820J50 C4792 -C4800 ,C4804 ,C4808 ,C4809 CKSQYF104Z50 C4811 CCSQCH8R0D50 C4813 ,C4815 ,C4818 ,C4827 -C4834 CKSQYF104Z50 C4017 CCSQSL101J50 C4712 ,C4713 CKSQYF333Z50 C4424 CCSQSL221J50 C3805 ,C3808 ,C3817 ,C4086 CKSQYF473Z50 C4453...
  • Page 17 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. R4707 ,R4708 ,R4729 ,R4792 ,R4832 RS1/16S102J R4241 ,R4244 ,R4275 ,R4298 ,R4337 RS1/16S222J R4837 RS1/16S102J R4360 ,R4365 ,R4369 ,R4375 ,R4379 RS1/16S222J R3803 ,R3820 ,R3823 ,R4078 ,R4079 RS1/16S103J R4413 ,R4427 ,R4469 ,R4496 ,R4512 RS1/16S222J...
  • Page 18 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. R3846 ,R4437 ,R4492 RS1/16S563J Q308 ,Q601 2SC3332 R4252 RS1/16S564J Q609 2SC3468 R4806 RS1/16S620J Q753 ,Q754 2SC4686A R4330 ,R4605 RS1/16S621J Q809 2SC4793 R4326 RS1/16S622J Q612 2SC5043 R4313 ,R4327 ,R4491 RS1/16S623J...
  • Page 19 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. C635 CEHAT220M50 R617 RD1/2PM563J C618 CEHAT220M63 R395 ,R634 RD1/4LMF100J C328 ,C624 ,C625 CEHAT221M25 R635 RD1/4MUF100J C332 ,C613 CEHAT330M35 R827 ,R828 RD1/4MUF560J C313 ,C344 CEHAT331M16 R630 RN1/2PC3902F C810 CEHAT3R3M2C R629...
  • Page 20 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. CN309 PLUG 4 -P KM250MA4 CAPACITORS CN307 PLUG 5 -P KM250MA5 C5158 ACG1001 CN308 PLUG 6 -P KM250MA6 C5157 ,C5164 ACH1318 CN306 PLUG 6 -P KM250MA6R C5153 CCCSL120J50 CN801...
  • Page 21 PRO-700HD Mark No. Description Part No. Mark No. Description Part No. OTHERS TV FRONT END SYSTEM UNIT J5203 4P HOUSING WIRE ADX2493 No service parts. 5204 CRT SOCKET AKG1005 5204 -5208 SCREW BBZ30P080FCU RF SW 5203 SCREW BPZ30P100FZK No service parts.

  • Page 22: Adjustment

    PRO-700HD 6. ADJUSTMENT 7 Key Indication of the Remote Control Unit RANGE: OFFSET: SRS ON/OFF CUT-G CONVER GE: TRU ON/OFF CUT-B Cyclically GV (Green, Vertical) RH (Red, Horizontal) GH (Green, Horizontal) RV (Red, Vertical) BV (Blue, Vertical) BH (Blue, Horizontal) (Data Value) VOL –...
  • Page 23 PRO-700HD 7 Jigs and Measuring Instruments /SAT ON/OFF POWER INPUT SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE AUDIO DISPLAY ENTER ¢ RETURN MUTING EDIT/ DTV/DVD LEARN MENU MENU SOURCE POWER GUIDE /ENTER ∞ INFO VCR REC FAVORITE CH ¡...
  • Page 24 Power supply adjustment Test cross H-center position adjustment Ÿ fi Contrast coarse adjustment Tuner block adjustment Brightness adjustment (PIONEER’s standard settings) White balance adjustment ⁄ fl Deflection yoke lean adjustment PIONEER’s standard settings & Screen center adjustment Side panel adjustment (Screen size 4:3) ¤...
  • Page 25 Vertical size adjustment Horizontal size adjustment If AMP ASSY is repaired or replaced Convergence adjustment Brightness adjustment (PIONEER’s standard settings) If R, G or B CRT DRIVE ASSY White balance adjustment is repaired or replaced Deflection yoke lean adjustment Screen center adjustment...
  • Page 26 PRO-700HD 7 Factory ADJ Mode Start ....Start adjusting 1st FAC .... Select 1st factory adjustment mode, then adjust. Select 1st FACTORY ADJ Mode Selecting the mode for adjustment operations. Start Front panel Normal LD position picture /SAT ON/OFF POWER...
  • Page 27 PRO-700HD Adjustment Range Mode Picture quality, eyc., Change amount check made operating. 1st FAC Start /SAT ON/OFF POWER INPUT ADJUSTMENT PD5462A RANGE SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE AUDIO DISPLAY : COLOR, MENU BASS ENTER ¢ RETURN...
  • Page 28 PRO-700HD Size Mode 1st FAC Start • Mode for roughly adjusting the horizontal and vertical sizes of the main deflection. • In this mode, the color is green only, screen size is FULL and the contrast is +10. • The above settings are cleared when this mode is exited.
  • Page 29 PRO-700HD Convergence Setting Mode 1st FAC Start Screen mode /SAT ON/OFF POWER ADJUSTMENT FULL INPUT SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE AUDIO DISPLAY /ENTER ENTER ¢ RETURN –128~127 –120 MUTING GV STATIC EDIT/ DTV/DVD LEARN MENU MENU...
  • Page 30 PRO-700HD Panel Adjustment Mode 1st FAC Start • Mode for adjusting the brightness, width, and position of the gray part (panel) of the 4:3 normal screen. /SAT <Data value section> ON/OFF POWER INPUT SPLIT SEARCH SELECT SCREEN SUB CH MODE...
  • Page 31 PRO-700HD Adjustment MPX Mode For adjusting the TV tuner MPX decoder section Auto adjust 1st FAC Start /SAT ON/OFF POWER INPUT ADJUSTMENT MPX F.E 1 ADJUSTMENT MPX F.E 1 SELECT SPLIT SEARCH SCREEN SUB CH MODE AUTO FREEZE 1 ATT...
  • Page 32 PRO-700HD 7 Adjustment Power supply adjustment -1 135V Power supply adjustment Color-bar generator Start D. DC voltmeter Color bar TP201 VR201 135.0V±1V POWER SUPPLY VR201 ASSY -2 14.5V Power supply adjustment Start Color-bar generator D. DC voltmeter Color bar TP204 VR202 14.5V ±...
  • Page 33 PRO-700HD Brightness adjustment (PIONEER’s standard settings) 1st FAC Start /SAT ON/OFF POWER INPUT ADJUSTMENT OFFSET (DOWN) SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE AUDIO DISPLAY ∞ ENTER ¢ RETURN MUTING EDIT/ DTV/DVD CUTR LEARN MENU MENU SOURCE POWER...
  • Page 34 PRO-700HD Screen center adjustment Start • For Red or Blue adjustment, turn 1st FACTORY ADJ mode ON and then OFF to place the convergence POSITION at the center of the adjustable range. • Move the centering magnet of the deflection yoke for the...
  • Page 35 PRO-700HD Vertical size adjustment Note : After the V. SIZE adjustment, enter the H. SIZE adjustment by 1st FAC Start pressing “1” key and readjust. Screen mode : FULL 91% ± 2% Monoscope Green screen V.SIZE General Adjust the size so that the picture is completely broadcasting displayed on the screen.
  • Page 36 PRO-700HD Convergence adjustment -1 Green line adjustment 1st FAC Note : • Adjustment in the horizontal direction The convergence for this device must be adjusted for each Start screen size FULL (NTSC, 4:3 NORMAL), ZOOM (NTSC), CIN- EMA WIDE (NTSC), NATURAL WIDE (NTSC), FULL (HD) ¶...
  • Page 37 PRO-700HD ¶ Horizontal correction adjustment of the green line • Select the Adjustment item GH - SUB PIN • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state. • Fine-adjust over the entire picture to obtain the optimum picture.
  • Page 38 PRO-700HD -2 Green line adjustment 1st FAC • Adjustment in the vertical direction Start ¶ Vertical correction adjustment of the green line • Select the Adjustment item GV - STATIC • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state.
  • Page 39 PRO-700HD ¶ Vertical correction adjustment of the green line • Select the Adjustment item GV - SUB PIN • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state. • Fine-adjust over the entire picture to obtain the optimum picture.
  • Page 40 PRO-700HD -3 Red line adjustment 1st FAC • Adjustment in the horizontal direction Start ¶ Horizontal correction adjustment of the red line • See Convergence Setting Mode in the Factory ADJ mode. SEARCH SELECT FREEZE • Input cross-hatch signals to this device’s video input terminal.
  • Page 41 PRO-700HD ¶ Horizontal correction adjustment of the red line • Select the Adjustment item RH - SUB PIN • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state. • Fine-adjust over the entire picture to obtain the optimum picture.
  • Page 42 PRO-700HD -4 Red line adjustment 1st FAC • Adjustment in the vertical direction Start ¶ Vertical correction adjustment of the red line • Select the Adjustment item RV - STATIC • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state.
  • Page 43 PRO-700HD ¶ Vertical correction adjustment of the red line • Select the Adjustment item RV - SUB PIN • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state. • Fine-adjust over the entire picture to obtain the optimum picture.
  • Page 44 PRO-700HD -5 Blue line adjustment 1st FAC • Adjustment in the horizontal direction Start ¶ Horizontal correction adjustment of the blue line • See Convergence Setting Mode in the Factory ADJ mode. SEARCH SELECT FREEZE • Input cross-hatch signals to this device’s video input terminal.
  • Page 45 PRO-700HD ¶ Horizontal correction and adjustment of blue line • Select the Adjustment item BH - SUB PIN • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state. • Fine-adjust over the entire picture to obtain the optimum picture.
  • Page 46 PRO-700HD -6 Blue line adjustment 1st FAC • Adjustment in the vertical direction Start ¶ Vertical correction adjustment of the blue line • Select the Adjustment item BV - STATIC • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state.
  • Page 47 PRO-700HD ¶ Vertical correction adjustment of the blue line • Select the Adjustment item BV - SUB PIN • Adjust the Data value Note : • Repeat the adjustments until you attain the optimum state. • Fine-adjust over the entire picture to obtain the optimum picture.
  • Page 48 PRO-700HD Test cross H-center position adjustment Start (LD player) : ADJ CONVERGE TUNER u-COM ASSY Adjust the position so that the L2202 test cross is placed at the center of the screen. L2202 /SAT ON/OFF POWER INPUT SELECT SPLIT SEARCH...
  • Page 49 PRO-700HD -2 Video level adjustment 2 Start Double screen /SAT ON/OFF POWER INPUT SPLIT SEARCH SELECT SCREEN SUB CH SPLIT MODE AUTO FREEZE AUDIO DISPLAY SUB CH ENTER ¢ RETURN MUTING EDIT/ DTV/DVD LEARN MENU MENU SOURCE POWER GUIDE /ENTER ∞...
  • Page 50 PRO-700HD -4 SAP VCO adjustment 1st FAC Start 1. ATT 5. SAP UF 2. ST VCO 6. WIDE BAN 12 3. SAP VC 7. SPECTRA 4. STUF Oscillator 00001 TUNER u-COM ASSY “COMPLETE” 1. ATT 5. SAP UF 2. ST VCO 6.
  • Page 51 PRO-700HD -5 STEREO LPF adjustment 1st FAC ADJUSTMENT MPX Start Oscillator 1. ATT 5. SAP LPF 2. ST VCO 6. WIDE BAN 3. SAP VC 7. SPECTRA TUNER u-COM ASSY 4. ST LPF 00000 “COMPLETE” K2702 Q2708 /SAT ON/OFF POWER...
  • Page 52 PRO-700HD -7 Separation adjustment (WIDE BAND) 1st FAC Start Adjust the output of the TV OUT terminal on the rear panel to the minimum level. /SAT ON/OFF POWER R ch level - L ch input (RF) minimum INPUT 1. ATT 5.
  • Page 53 (Don't signal move the screen VR and CUT-G). : CUT-R : CUT-B PIONEER’s standard settings -1 Sharpness adjustment 1st FAC Start ∞ STD OFFSET Telop : Blue Oscilloscope /SAT “Multiburst”...
  • Page 54 PRO-700HD -3 Tint adjustment 1st FAC Start “Color bar” /SAT ON/OFF POWER INPUT ADJUSTMENT OFFSET SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE AUDIO DISPLAY ENTER TINT Adjust the screen to optimum condition. ¢ RETURN MUTING EDIT/ DTV/DVD LEARN...
  • Page 55 PRO-700HD Side panel adjustment (Screen size 4 : 3) -1 Panel position adjustment 1st FAC Start (ADJUSTMENT PANEL MODE) “Monoscope” <Panel position data value> /SAT ADJUSTMENT PANEL ON/OFF POWER INPUT SPLIT SEARCH SELECT SCREEN SUB CH MODE AUTO FREEZE AUDIO...
  • Page 56 PRO-700HD -2 Adjustment of panel luminance 1st FAC Start (ADJUSTMENT PANEL MODE) <Panel bright> <Data value > “Monoscope” /SAT ON/OFF POWER INPUT SPLIT MULTI SELECT SCREEN SUB CH MODE AUTO STILL AUDIO DISPLAY ADJUSTMENT PANEL ENTER ¢ RETURN MUTING RETURN...
  • Page 57 PRO-700HD SPLIT screen adjustment 1st FAC Start (SIGNAL ADJUSTMENT MODE) Double screen /SAT (SPLIT ON) ON/OFF POWER INPUT SPLIT MULTI SELECT ADJUSTMENT SUGNAL COMPOSITE SCREEN SUB CH MODE AUTO STILL AUDIO DISPLAY ¡ (YELLOW) ENTER ¢ RETURN MUTING EDIT/ DTV/DVD...

  • Page 58: General Information

    PRO-700HD 7. GENERAL INFORMATION 7.1 WIRING DIAGRAM Reconnect any disconnected lead wires of the Projection monitor receiver. The important points for connection of the lead wires are as shown below. You may find that they were connected differently. Be sure reconnect the lead wires as they were.
  • Page 59 PRO-700HD 7.2 IC ¶ The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams. ¶ List of IC TA8638N CA0007AD CXA1315P STK4412 NJM2187L PD5462A9 PD5463B9 PD5497B9 PD0264AM TA1276AN AN5344FBP...
  • Page 60 PRO-700HD ¶ Pin Function Pin No. Pin Name Function Pin for preventing radiation of X-ray from CRT. X-ray protection input When this pin is set above 1.3V (standard), the horizontal output will stop until H.VCC becomes a low level. Horizontal drive output Horizontal output pin.
  • Page 61 PRO-700HD Pin No. Pin Name Function Horizontal sync separation output pin. Sync separation output Separates and outputs the sync signal of the composite signal input to Pin 24. Sync separation input Horizontal sync separation input pin. 7 CA0007AD (AMP ASSY: IC907) DUAL ANALOG MULTIPLIER IC ¶...
  • Page 62 PRO-700HD ¶ Pin Function Pin No. Pin Name Function Input/output pin of the general I/O port. VILmax: 1.5V VIHmin: 3V VOLmax: 0.4V DAC4 DAC3 DAC2 D/A converter output pin. DAC1 DAC0 — GND pin. Input/output pin of the general I/O port.
  • Page 63 PRO-700HD 7 NJM2187L (AMP ASSY: IC1204) SURROUND IC ¶ Pin Assignment F_OUT MODE2 F_IN MODE1 VREF CE_IN2 FI_IN Rch IN Lch IN FIL1_OUT Rch OUT FIL1_IN Lch OUT SPACE_OUT FIL2_IN2 SPACE_IN FIL2_IN CENTER_OUT FIL2_OUT CENTER_IN ¶ Pin Function Pin No.
  • Page 64 PRO-700HD 7 PD5462B9 (TUNER u-COM: IC2201) MAIN µ-COM ¶ Pin Function Pin No. Pin Name Function OPTION For software destination switching P:L, S:H TEMP .S Unused – AFT1 AFT analog voltage input to tuner 1 – AFT2 AFT analog voltage input to tuner 2 –...
  • Page 65 PRO-700HD Pin No. Pin Name Function C.MUTE Converter mute output. When AC is supplied:L, Discharge:H. MUTE ON: L, OFF: H C.ENB ENB output for PM0011 AS (convergence DAC IC) control. Communication permission: L PM0011AS (convergence DAC IC, IC1403, IC1408-IC1412), HG62G010R29FB (auto zoom IC, IC4005) –...
  • Page 66 PRO-700HD 7 PD5463B9 (TUNER u-COM: IC2202) SUB µ-COM ¶ Pin Function Pin No. Pin Name Function DH BLK CCD display sync signal double speed HBLK input Positive polarity V BLK2 CCD display sync signal VBLK input Positive polarity OPTION Voltage input for switching software destination...
  • Page 67 PRO-700HD Pin No. Pin Name Function Switches between external double speed component input signal, External double speed: H AUX SW DTV 1080 signal, and double speed component signal double Others: L speed signal processed inside the unit COMP3 MUTE Sub-screen component signal (15K) mute output...
  • Page 68 PRO-700HD Pin No. Pin Name Function – Supplies 0V – – Supplies +5V power supply – OSC1 Clock input for display – OSC2 Clock output for display – RESET RESET input RESET:L Unused – Unused – Unused – Unused –...
  • Page 69 PRO-700HD 7 PD0264AM (TUNER u-COM ASSY: IC2206) OSD (On-Screen Display) IC ¶ Pin Assignment ¶ Block Diagram AVSS 28 AVSS2 AVDD 27 R Clock Dot clock generator OSCIN 26 G OSCOUT AVSS OSCIN 25 B Text RAM Display 20 DC...
  • Page 70 PRO-700HD ¶ Pin Function Pin No. Pin Name Function AVSS — Ground pin of the analog circuit section. An external low-pass filter is connected. The free-running frequency of VCO is determined. OSCIN Oscillation input pin. This pin must be secured to the ground level.
  • Page 71 PRO-700HD 7 TA1276AN (VIDEO ASSY: IC5251) CHROMA SYNC DEFLECTION PROCESSING IC PAL/NTSC SYSTEM COLOR TV IC ¶ Block Diagram fsc Output SENS Input Output Cut-Off Cut-Off R S/H High Bright SCP Output R S/H Output Color Color SECAM Color SECAM Control...
  • Page 72 PRO-700HD ¶ Pin Function Pin No. Pin Name Function I/O Signal Outputs the VCXO oscillation waveform. 3.58 NTSC colored:3.2V Inputs the 3.58 NTSC signal, and the output DC becomes 3.2V fsc output Black/white/Other system:1.4V only for color. It is 1.4V for Black/white and other signals.
  • Page 73 PRO-700HD Pin No. Pin Name Function I/O Signal (1) When bus HD-OUT=0, outputs the HD pulse imposed with 1µs Ext BPP AFC (pulse width:1 us). HD output Also provided with a BPP (black peak detection stop pulse) signal external input function.
  • Page 74 PRO-700HD Pin No. Pin Name Function I/O Signal B S/H S/H (sample hold) pin for AKB mode or clamp mode. G S/H S/H (sample hold) pin for AKB mode or clamp mode. VP output Vertical pulse output. Switch for switching the internal RGB signal and analog RGB A.
  • Page 75 PRO-700HD Pin No. Pin Name Function I/O Signal Soft AKB 7.0V YM input Internal RGB signal halftone SW. Halftone 0.75V Outputs the DC played back Y signal which had passed through VSM output HPF. 3.5V The output is muted by the pins 32 and 36 switches.
  • Page 76 PRO-700HD 7 AN5344FBP (SUB VIDEO ASSY: IC4201) COLOR CONTROL IC ¶ Block Diagram CENT +C.C –C.C C.S.C C.G.C GND 4 GND 3 I.G.C CONT K.G.C Clamp H B-Y OUT VCC 4 CNR R-Y IN VCC 3 Polarity Color compensation switch...
  • Page 77 PRO-700HD Pin No. Pin Name Function Pin No. Pin Name Function C.G.C Color compensation gain control CNR R-Y IN CNR R-Y input C.S.C Color compensation stop control CNR B-Y IN CNR B-Y input – C.C – side compensation control K CONT K control + C.C...
  • Page 78 PRO-700HD ¶ Pin Function Pin No. Function Pin No. Function input Sharpness mute control Sharpness control VM preamplifier gain control VM preamplifier input Y output VM preamplifier output Contour gain control Sub screen Ys input Contour bias Ys input Secondary differential input...
  • Page 79 PRO-700HD 7 SAA7165WP (SUB VIDEO ASSY: IC4702) VIDEO ENHANCEMENT D/A ¶ Pin Assignment ¶ Block Diagram CUR V DDD1 DDD2 DDA1 DDA2 DDA3 DDA4 Y7 to Y0 21 to 14 PEAKING ¶ DAC 3 FORMATTER SSA3 CORING REFL YUV-bus DATA ¶...
  • Page 80 PRO-700HD Pin No. Pin Name Function C-bus clock line c-bus data line VSS D2 Digital ground 2(0V) — VDD D2 — +5V digital supply voltage 2 VDD A1 — +5V analog supply voltage for buffer of DAC 1 (R-Y) ± (R-Y) output signal (analog signal) VSS A1 —...
  • Page 81 PRO-700HD ¶ Pin Function Function Pin No. Pin Name Not connected — Decoupling input (internal stabilization loop decoupling) REG1 Y analog voltage input Decoupling input (internal stabilization loop decoupling) REG2 Y clamp capacitor connection CLPY Analog positive supply voltage (+5V) VCC A —...
  • Page 82 PRO-700HD 7 SAA4952WP (SUB VIDEO ASSY: IC4704) MEMORY CONTROLLER ¶ Pin Assignment ¶ Block Diagram SAA4952WP MICROCONTROLLER INTERFACE PROCESSING STROBE VACQ SWC1 SWC05 VDFL HRA/BLNA ACQUISITION HWE1 HORIZONTAL STROBE HDFL (12,13.5,16,18MHz) TIMING VACQS HRA/BLNA HRDFL TEST SAA4952WP LOGIC ACQUISITION VWE1...
  • Page 83 PRO-700HD ¶ Pin Function Pin No. Pin Name Function Read enable signal output (memory 2) BLND Horizontal branking signal output (display part) Address latch enable signal input Wrirw/read data signal input VCC 2 Supply voltage 3 — VSS 2 Ground 2 —...
  • Page 84 PRO-700HD 7 TMS4C2973-26 (SUB VIDEO ASSY: IC4705, IC4706) 2.9M FIELD MEMORY ¶ Pin Assignment SSOP SWCK SRCK RSTW RSTR ¶ Pin Function Pin No. Pin Name Function Pin No. Pin Name Function Vss1 — Ground Vcc2 — 3.3V power supply voltage...
  • Page 85 PRO-700HD 7 CD74HCT4046AM (SUB VIDEO ASSY: IC4713) PLL IC ¶ Pin Assignment ¶ Block Diagram VCO OUT COMP IN SIG IN PHASE COMP OUT I PHASE I CURRENT AMP. PHASE III COMP CURRENT MIRROR "1" PHASE II CURRENT "1" SOURCE...
  • Page 86 PRO-700HD 7 SAA4990H (SUB VIDEO ASSY: IC4719) PROZONIC IC ¶ Pin Assignment ¶ Block Diagram TEST1/AP REFPRMATTER TEST2/SP LINE LINE NOISE LINE MEMORY 2 MEMORY 3 FORMATTER SNCL REDUCTION MEMORY 1 MIXER MIXER REFPRMATTER SNDA SNRST LINE LINE NOISE LINE...
  • Page 87 PRO-700HD ¶ Pin Function Pin No. Pin Name Function YUV B8 UV bit 0 from FM2 YUV B9 UV bit 1 from FM2 YUV B10 UV bit 2 from FM2 YUV B11 UV bit 3 from FM2 YUV B0 Y bit 0 from FM2...
  • Page 88 PRO-700HD Pin No. Pin Name Function YUV A4 Y bit 4 from FM1 YUV A3 Y bit 3 from FM1 YUV A2 Y bit 2 from FM1 VSS 8 Ground 8 — VDD 8 Supply voltage 8 — YUV A1...
  • Page 89 PRO-700HD 7 PQ05RD1B (SIGNAL ASSY: IC7007, IC7105) REGULATOR ¶ Pin Assignment ¶ Block Diagram Exclusive IC ¶ Pin Function Pin No. Function DC input (Vin) DC output (Vo) – ON/OFF control (Vc) 7 uPD64081BGF-3BA (SIGNAL ASSY: IC7002) 3D Y/C SEPARATION IC ¶...
  • Page 90 PRO-700HD ¶ Pin Function Pin No. Pin Name Function DGND Digital block ground – Address output for external EDO memory MCAS CAS output for external EDO memory (Active low) WE output for external EDO memory (Active low) OE output for external EDO memory (Active low)
  • Page 91 PRO-700HD Pin No. Pin Name Function AVDD fsc generator DAC block power supply – FSCO fsc generator fsc output – AGND fsc generator DAC block ground – AGND 8fsc-PLL ground – FSCI 8fsc-PLL fsc input – CPLL 8fsc-PLL filter output (Opened or connected to GND) –...
  • Page 92 PRO-700HD Pin No. Pin Name Function DGND Digital block ground – AVDD Y-DAC, C-DAC power supply – CBPC C-DAC phase compensation output C-DAC analog C signal output Y-DAC analog Y signal output CBPY Y-DAC phase compensation output AGND Y-ADC, C-DAC ground –...
  • Page 93 PRO-700HD ¶ Pin Function Pin No. Pin Name Function I/O Signal Connected to X'tal. Oscillation frequency f0 and frequency 4.43 MHz X'tal adjustment range can be changed in series capacity and parallel DC 4.0V N-X'tal capacity respectively. 90 mVp-p Frequency adjustment range for oscillation frequency f0 with 3.58 MHz X'tal...
  • Page 94 PRO-700HD Pin No. Pin Name Function I/O Signal 8.3V Outputs the SCP (Sand Castle Pulse). 4.8V SCP output The output signals are clamp pulse, horizontal blanking pulse, and 2.5V vertical blanking. Dig GND — Logic block GND pin. – 3.5V Input pin for the CP/HP pulse for operating the SW circuit.
  • Page 95 PRO-700HD Pin No. Pin Name Function I/O Signal 1Vp-p Y input Input pin for composite video signal or Y signal. 2.5V DAC Vcc — VCC pin for DAC block and chroma processing block. – C Vcc — Connected to 5V (standard).
  • Page 96 PRO-700HD 7 PQ09RD1B (SIGNAL ASSY: IC7106) REGULATOR ¶ Pin Assignment ¶ Block Diagram Exclusive IC ¶ Pin Function Pin No. Function DC input (Vin) DC output (Vo) – ON/OFF control (Vc) 7 CXA2119M (SIGNAL ASSY: IC7250) (For SIGNAL ASSY AWV1725) Y COLOR DIFFERENCE I/F SW ¶...
  • Page 97 PRO-700HD ¶ Pin Function Pin No. Pin Name Function Y1 IN Pin for inputting the YCbCr signal. Cb1 IN Inputs the YCbCr specifications (0.7 Vp-p for 100% color bar) signal. Cr1 IN The pedestal level of the input signal is clamped at 4V.
  • Page 98 PRO-700HD Pin No. Pin Name Function Control pin for the output selection SW of the 3 input composite video signals. SEL1 SEL2 SIG OUT SIG1 SEL2 High SIG2 High SIG3 High High Prohibited VILMAX=0.5V, VIHMIN=3.5V Pin for inputting the composite video signal.
  • Page 99 PRO-700HD ¶ Pin Function Pin No. Pin Name Function AVSS Analog GND – Reference pin for ADC. – Reference pin for ADC. – ADIN Composite video signal input pin. BIAS1 Bias pin for ADC. – TEST TEST pin. Connected to the digital GND.
  • Page 100 PRO-700HD ¶ Pin Function Function Pin No. Pin Name Analog power supply pin (+5 V) – Analog power supply pin (+5 V) – Analog power ground pin (0 V) – Digital output pins. D : MSB, D : LSB Digital power ground pin (0 V) —...
  • Page 101 PRO-700HD ¶ Pin Function Pin No. Pin Name Function – Y7MI Y6MI Y5MI Y4MI Main screen Y signal input Y3MI Y2MI Y1MI Y0MI CB7MI CB6MI CB5MI CB4MI Main screen Cb signal input CB3MI CB2MI CB1MI CB0MI CR7MI CR6MI CR5MI Main screen Cr signal input...
  • Page 102 PRO-700HD Pin No. Pin Name Function – – Y1SI Y signal input/R signal input for sub screen (When inputting VGA) Y0SI CB7SI CB6SI CB5SI CB4SI Cb signal input/G signal input for sub screen (When inputting VGA) CB3SI CB2SI CB1SI CB0SI...
  • Page 103 PRO-700HD Pin No. Pin Name Function – – Display screen digital G signal output WCKO External D/A -C clock output for RGB output – Display screen digital B signal output TMC1I Test input (Normally LOW input) TBUSD Tbus DATA signal input/output...
  • Page 104 PRO-700HD Pin No. Pin Name Function – – CASB1O LCAS, UCAS to DRAM 1 for multi window – CASB2O LCAS, UCAS to DRAM 2 for multi window – RASB1O RAS to DRAM 1 for multi window – – RASB2O RAS to DRAM 2 for multi window –...
  • Page 105 PRO-700HD 7 HY514264BJC-50A (SIGNAL ASSY: IC7003, IC7701, IC7702) 4M DRAM ¶ Pin Assignment ¶ Block Diagram DQ14 DQ15 40 Vss 39 DQ15 38 DQ14 DATA INPUT DATA INPUT 37 DQ13 20 OE BUFFER BUFFER DQ0-7 DQ8-15 DQ0-7 DQ8-15 36 DQ12...
  • Page 106 PRO-700HD 7 TLC2932IPW (SIGNAL ASSY: IC7703, IC7704) PLL IC ¶ Pin Assignment ¶ Block Diagram LOGIC V VCO V SELECT BIAS VCO OUT COIN VCO GND 1/2 DIVIDER VCO INHIBIT PFD INHIBIT PFD OUT LOGIC GND ¶ Pin Function Pin No.
  • Page 107 PRO-700HD 7 PD5499A (SIGNAL ASSY: IC7800) CONTROL µ-COM ¶ Pin Assignment ¶ Pin Function Pin No. Pin Name Function Unused Unused Unused Unused MREQ M-S serial main request input Unused T bus period output T bus clock output DATA T bus clock output...
  • Page 108 PRO-700HD Pin No. Pin Name Function RESET Reset input System clock input XOUT System clock output Power supply input (GND) TVGP+ vertical sync signal output PASS 1-screen through switching output S_SW Sub composite /S switching output M_SW Main video/EPG switching output...
  • Page 109 PRO-700HD 7 24LC08B(I)SN (SIGNAL ASSY: IC7802) 8K EEPROM ¶ Pin Assignment ¶ Block Diagram HV GENERATOR EEPROM MEMORY ARRAY CONTROL CONTROL XDEC LOGIC LOGIC PAGE LATCHES YDEC SENSE AMP R/W CONTROL ¶ Pin Function Pin No. Pin Name Function No Internal Connection...

  • Page 110: Block Diagrams

    PRO-700HD 7.3 BLOCK DIAGRAMS 7.3.1 µ-COM BLOCK SIGNAL ASSY IC7801 IC7800 IC7802 IC2205 IC2203 IC2207 IC2201 IC220 IC2206 IC2204 IC2209 IC1171 AMP ASSY CONVER DAC ASSY...
  • Page 111 PRO-700HD SUB VIDEO ASSY OSC SW2 C2203 IC4405 IC2202 IC5254 VIDEO ASSY...
  • Page 112 PRO-700HD 7.3.2 AUDIO BLOCK IC2702 IC2701 IC6402 IC6001 IC6401...
  • Page 113 PRO-700HD IC1204 IC1205 – 6.5dB 12, 11 IC1201 IC1201 IC1201 IC1207 + 23.5dB IC1202 - 3 .5...
  • Page 114 PRO-700HD 7.3.3 VIDEO BLOCK (OTHERS MODEL) (SIGNAL ASSY) (OTHERS MODEL) IC7305 IC6003 IC7703, IC7704 IC4002 IC7300 IC7250 IC7702, (OTHER MODEL) IC7003 IC7701 IC7002 IC7710 IC7700 IC6001 IC4006 IC4 IC7103 IC7100 IC7305 IC7800 IC7307 IC6403 IC7306 IC7801 (AV I/O ASSY) IC2212...
  • Page 115 PRO-700HD (SUB VIDEO ASSY) IC4703 IC4705 IC4702 IC3801 IC4402 IC4404 IC4719 IC4005 IC4706 IC4002 IC4704 IC4720 IC4004 IC4007 IC4001 IC4006 IC4003 IC4718 IC4004 IC4405 OSC SW1 IC4403 (VIDEO IC5101 (R), IC5151 (G), ASSY) IC5201 (B) IC5251 IC5253 IC5254 IC903, IC904...

  • Page 116: Panel Facilities And Specifications

    PRO-700HD 8. PANEL FACILITIES AND SPECIFICAITONS 8.1 PANEL FAICLITIES A flip-down door conceals the control panel. Push gently and 1 POWER STANDBY/ON indicator release, to open the door. To close the door, lift it back up into place. 2 DTV indicator Lights when receiving a digital television broadcast.
  • Page 117 If the normal operation cannot be restored after the above AUDIO OUT: FIXED treatment, immediately unplug the power cord and call your SYSTEM MODE: nearest PIONEER-authorized service center. • When this button is pressed while adjusting the outer point convergence, the outer point convergence returns NOTE: to the initial mode.
  • Page 118 ENTER RECEIVER CONTROL BUTTONS ¢ RETURN MUTING When a Pioneer receiver is connected to the Monitor, the receiver can be operated using buttons 4 to 6. When another company’s receiver is connected to the Monitor, EDIT/ DTV/DVD have the signals for 4 to 6 learned.
  • Page 119 PRO-700HD MONITOR (TV) CONTROL BUTTONS Set the mode switch to TV/DTV. Mode switch 1 TV POWER button (STANDBY/ON) Turns the power of the monitor on and off. /SAT 2 Input Selector buttons (TV, DTV* , INPUT 1 to INPUT 4) ON/OFF Press the button to select the source you wish to watch.
  • Page 120 PRO-700HD - DISPLAY button Press to display the input source, channel, setting and other screen indicators for a few seconds. = CH ENTER button Mode switch Fix the selected channel with the direct channel selection buttons. ~ CH RETURN (channel return) button...
  • Page 121 PRO-700HD 7 SPECIFICATIONS Electrical section, miscellaneous Display and amplifier section Power requirements ........120 V AC, 60 Hz Reception system ..American TV standard NTSC system Power consumption Screen size ..............64" At time of shipment ...... 343 W, 650 VA (CSA) CRT ..........

Table of Contents