Setting Your Printer As The Default Printer; Configuring Network Settings; Configuring A Wireless Network Connection - Kodak ESP 5250 Start Here Manual

Configuring Your Printer
Setting your
printer as the
default printer

Configuring network settings

Configuring a
wireless network
connection
5
If you have more than one printer, and after installation your all-in-one printer was
not the default printer, you can make your all-in-one printer your default printer.
For all operating systems, if you connect your printer with a USB cable and
IMPORTANT:
with a wireless connection, your printer may be listed twice. Be sure to select
the correct printer. (The name of the printer plus a number indicates a
wireless connection; for example, KodakESP5200+1133.)
For all computers and operating systems: If you haven't yet installed the printer
software, insert the software CD that came with your printer and follow the
on-screen instructions to install the software.
For WINDOWS XP OS-based computers
1. Select Start > Control Panel > Printers and Faxes .
2. Right-click your printer, and select Set as Default Printer .
For WINDOWS VISTA OS-based computers
1. Select Start > Control Panel > Hardware and Sound > Printers .
2. Right-click your printer, and select Set as Default Printer .
For WINDOWS 7 OS-based computers
1. Select Start > Control Panel > Hardware and Sound > Devices and Printers .
2. Right-click your printer, and select Set as Default Printer .
For MACINTOSH Computers
When a new printer is installed, it becomes the default printer. If your all-in-one
printer is not the default printer:
1. From the dock, open System Preferences .
2. In the Hardware section, click Print & Fax .
3. Select your printer from the drop-down list next to Default Printer .
To connect your printer to an 802.11 wireless (Wi-Fi) network, see the information
that came with your printer, or refer to the following information, as needed.
Additional resources for related topics, information, and network troubleshooting
are available at www.kodak.com/go/inkjetnetworking.
If you are unsure of how your network is configured, contact your Internet service
provider or your network administrator for assistance.
If you did not do so during printer setup, you can connect your printer to a wireless
network from the printer control panel.
www.kodak.com/go/aiosupport