Clearing The System Back To Manufacturers Settings; The Noise Pollution Act - Bailey Motorhomes Owner's Manual

4
Caravan Equipment

4.22.20 Clearing the System back to Manufacturers Settings

If for any reason you wish to set the IDM back to its factory settings then the following procedure should
be used:
1. Press "F", keep finger on the "F" key until 5 bursts are heard from the keypad buzzer. The IDM has
now reverted to factory settings.
This can only be done when the system is disarmed.

4.23.21 The Noise Pollution Act

If the system is activated continuously for 20 minutes, the system will shut down. This effectively disarms
the system. This is a requirement of the Noise Pollution Act.
Plug-In-Systems reserve the right to change product specification at any time without prior notice.
4-46