Connecting The Ac Power Supply To The Power Module; Ac Power Supply Connection Precautions; Simple Ac Power Connection Steps - D-Link DGS-6600 Series Hardware Installation Manual

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

Connecting the AC Power Supply to the Power Module

Use the AC power cable to connect to the AC power module panel, as indicated in Figure 2-6:
Figure 2-10 Connecting the DGS-6604 to an AC power supply connection

AC Power Supply Connection Precautions

• Verify that the provided external power supply matches the power module installed in the Switch before
connecting the power supply.
• Use a power cable with a standard 3-pin connector to make the power connection.
• Ensure that the connected power cables have good contacts.

Simple AC Power Connection Steps

1. Insert the power cable's plug into the power module.
2. Secure the power cable to the cable clip on the right.
3. Connect the other end of the power cable into the corresponding socket or connector.
46