Dgs-6600-24Sc2Xs Module - D-Link DGS-6600 Series Hardware Installation Manual

Layer 3 chassis ethernet managed switch
Hide thumbs Also See for DGS-6600 Series:
Table of Contents

Advertisement

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

DGS-6600-24SC2XS Module

The basic appearance of the DGS-6600-24SC2XS module is shown in Figure 1-7. The DGS-6600-24SC2XS is a
line card module of the DGS-6604, which provides 12 SFP ports, 12 combo ports (10/100/1000Base-T/SFP Module)
and 2 SFP+ ports.
Interface
The DGS-6600-24SC2XS features 12 SFP ports, 12 combo ports (10/100/1000Base-T/SFP Module) and 2 SFP+
ports, please note that the DGS-6600-24SC2XS last two SFP+ ports do not support DEM-310GT/311GT/312GT2/
314GT/315GT/330T/R/331T/R/210/211/220/T/R or DGS-712 transceiver
LEDs
The DGS-6600-24SC2XS uses different colored LEDs to indicate different systems status, described in Table 1-
7.
LED
Color and Status
Indicator
Power
Solid Green
Off
System
Solid Green
Solid Red
Blinking Green
Off
Link/Act/
Solid Green
Speed Mode
Blinking Green
Solid Amber
Blinking Amber
Off
Figure 1-7 Basic Appearance of DGS-6600-24SC2XS
This LED will light solid green when the Switch is powered on.
This LED will remain off when the Switch is powered off.
This LED will light solid green when the Switch is operating
normally.
This LED will light solid red when the Switch has failed.
This LED will blink green while the Switch is booting up or
shutting down.
This LED will remain off when the Switch is shut down.
This LED will light solid green when there is a secure
connection (or link) to a device. (Either 1000 Mbps or 10 Gbps,
depending on if it is a 10/100/1000 Mbps port, SFP port or a
10G port.)
This LED will blink green when there is activity occurring on a
port that is operating. (Either 1000 Mbps or 10 Gbps, depending
on if it is a 10/100/1000 Mbps port, SFP port or a 10G port.)
When there is a secure connection or link at any of the ports.
(Either 10/100 Mbps or 100 Mbps, depending on if it is a 10/
100/1000 Mbps port or an SFP port.)
When there is a reception of transmission. (Either 10/100 Mbps
or 100 Mbps, depending on if it is a 10/100/1000 Mbps port or
an SFP port.)
This LED will remain off when there is no link on the port.
Table 1-7 DGS-6600-24SC2XS LED Behavior
.
Description
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-6604Dgs-6608

Table of Contents