DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide
Chapter 5 Web-based Switch Management
Introduction
Enabling and Configuring the Web User Interface
Logging onto the Web Manager
Web-based User Interface (Web UI)
Configuring the Management Interface using the Web UI
Introduction
Some of the software functions of the Switch can be managed, configured, and monitored via the embedded
web-based (HTML) interface. It is possible to manage the Switch from remote stations anywhere on the network
through a standard web-browser. The browser acts as a universal access tool and can communicate directly with
the Switch using the HTTP protocol l
NOTE: Only one user can be logged into the Switch using the Web UI.
The Web-based management module and the Console or Telnet module are different ways to access the same
internal switching software and configure it. The settings in the Web-based management module are only a small
subset of all the functions found through the Console or Telnet CLI. The following is a list of the Web UI
functionality:
Configuration Item
Device Information
Slot 1 Information
Slot 3 Information
Protocol Status
Management Interface Settings
System Logging Settings
System Log Servers
Interface Settings
CPU Utilization
Environment Temperature
Environment Fans
Power Status
Table 5-1 Web UI Configuration Functionality
Display Configuration
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
65
Edit Configuration
N
N
N
N
Y
Y
Y
Y
N
N
N
N