Connecting Dc Power Supply - D-Link DAS-3626 Quick Installation Manual

Connecting DC Power Supply

Follow the instructions below to connect the DC power supply of the switch to a DC power source.
Figure 2. Power connections attached to DC contacts on assembly
To connect the DC power supply:
1. Firmly attach the DC power to the negative and positive contacts on the wiring assembly.
The negative pole (-) connects to the -48V contact.
•
The positive pole (+) connects to the -48V Return contact.
•
If available, the earth ground may be connected to the FG contact post.
•
2. Tighten the contact screws so the connection is secure.
Connecting AC Power Supply
Follow the instructions below to connect the AC power supply of the switch to a AC power source.
Figure 3. Power connections attached to AC contacts on assembly