Dgs-6600-48T Module - D-Link DGS-6600 Series Hardware Installation Manual

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

DGS-6600-48T Module

The basic appearance of the DGS-6600-48T module is shown in Figure 1-11. The DGS-6600-48T is a line card
module of the DGS-6604/6608, which provides 48x10/100/1000 Base-T ports.
Interface
The DGS-6600-48T features 48x10/100/1000 RJ-45 ports.
LEDs
The DGS-6600-48T uses different colored LEDs to indicate different systems status, as described in Table 1-15.
LED
Color and Status
Indicator
Power Solid Green
Off
System Solid Green
Solid Red
Blinking Green
Off
Link/Act/ Solid Green
Speed Mode
Blinking Green
Solid Amber
Blinking Amber
Off
Figure 1-11 Basic Appearance of DGS-6600-48T
This LED will light solid green when the Switch is powered on.
This LED will remain off when the Switch is powered off.
This LED will light solid green when the Switch is operating
normally.
This LED will light solid red when the Switch has failed.
This LED will blink green while the Switch is booting up or
shutting down.
This LED will remain off when the Switch is shut down.
This LED will light solid green when there is a secure
connection (or link) to a device that is operating at 1000Mbps.
This LED will blink green when there is activity occurring on a
port that is operating at 1000Mbps.
This LED will light solid amber when there is a secure
connection (or link) to a device that is operating at 10/100Mbps.
This LED will blink green when there is activity occurring on a
port that is operating at 10/100Mbps.
This LED will remain off when there is no link on the port.
Table 1-15 DGS-6600-48T LED Behavior
Description
26