Laser Safety - D-Link DGS-6600 Series Hardware Installation Manual

DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide

Laser Safety

A number of the optical modules included in the DGS-6600 series switches are Class I laser products. Therefore,
when using these products pay careful attention to the following:
• Ensure that any working fiber transceivers are either connected to a working optical fiber connection or
covered with a dust cap, to keep out of dust and avoid damaging your eyesight.
• Never look into any optical port.
CAUTION: Never stare into any optical port under any circumstances, as this may
damage your eye sight.
xiii