Networking Features; Tie Line Service - Panasonic KX-TDE100 Features Manual

1.30 Networking Features

1.30.1 TIE Line Service

Description
A TIE line is a privately leased communication line between two or more PBXs, which provides cost effective
communications between company members at different locations. The TIE lines can be used to call through
the PBX to reach another switching system (PBX or telephone company). By using TIE lines, the PBX can
support not only communications with the public network but with other company members in the private
network where the PBX is included.
Interface
The following interfaces can be used to establish a private network:
Interface
E & M
T1 (TIE [E & M])
E1 (E & M)
BRI/PRI (QSIG)
VoIP
The available interfaces depend on the cards installed in the PBX.
® 3.30 [1-1] Slot—Port Property - BRI Port—Network Numbering Plan—
® 3.32 [1-1] Slot—Port Property - PRI Port—Network Numbering Plan—
® 3.35 [1-1] Slot—Port Property - T1 Port—
® 3.41 [1-1] Slot—Port Property - E1 Port—
® 3.44 [1-1] Slot—Port Property - EM Port—
Explanation
1.
Making a TIE Line Call
One of the following two methods can be used to make a TIE line call.
a.
Extension Number Method (Access without PBX Code)
Dial the [Extension Number] only.
[Example]
Extn.1011
Dials "3011".
Analogue
Digital (64 kbps ´ 24 channels)
Digital (64 kbps ´ 30 channels)
Digital (ISDN 2B+D/30B+D/23B+D)
Internet Protocol (IP)
PBX-1
TIE Line
Interface Interface Interface
Extn.1012
Dials "2011".
Network Type
Trunk Property
Trunk Property
Trunk Property
PBX-2
TIE Line
Extn. 2011
1.30.1 TIE Line Service
Trunk Property
Trunk Property
PBX-3
Interface
Extn. 3011
Feature Guide 327