Trunk Access - Panasonic KX-TDE100 Features Manual

1.5.5 Seizing a Line Features

1.5.5.3 Trunk Access

Description
The following methods can be used to access a trunk:
Method
Idle Line Access (Local
Access)
Trunk Group Access
S-CO Line Access
Conditions
•
COS programming determines the trunk groups available for making calls.
•
Trunk numbers can be referred on a trunk port basis.
•
Button Assignment
A flexible button can be customised as a G-CO, L-CO, or S-CO button as follows:
Type
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
It is possible to assign:
–
the same trunk to the S-CO button and to a G-CO button.
–
the same trunk group to more than one G-CO button.
–
more than one L-CO button.
Dialling the Trunk Access number selects a CO button in the following order: S-CO ® G-CO ® L-CO
•
Direct Trunk Access
Pressing an idle CO button automatically switches on the hands-free operation mode and allows a user to
use On-hook Dialling. The user need not press the SP-PHONE button, MONITOR button, or lift the handset.
•
Group Hunting Order for Idle Line Access
An idle trunk is selected from the trunk groups assigned for Idle Line Access. If multiple trunk groups are
available, the trunk group hunting sequence can be determined through system programming.
•
Trunk Hunting Order for Idle Line Access and Trunk Group Access
The trunk hunting sequence in a trunk group (from lowest numbered trunk, from highest numbered trunk
or rotation) can be determined through system programming.
•
A company name or customer name can be assigned on a trunk port basis so that the operator or extension
user can view the destination that the external caller is trying to reach before answering. This is useful, for
example, when multiple companies share the same operator.
•
It is possible to identify the trunk ports that have trunks connected. This prevents extension users from
originating a call to a trunk that is not connected.
106 Feature Guide
Description
Selects an idle trunk automatically
from the assigned trunk groups.
Selects an idle trunk from the
corresponding trunk group.
Selects the desired trunk directly. Dial the S-CO Line Access number and
No parameter (all assigned trunk groups through system programming
are applied.)
A specified trunk group.
A specified trunk.
Accessing method
Dial the Idle Line Access number, or
press a L-CO button.
Dial the Trunk Group Access number
and a trunk group number, or press a
G-CO button.
the trunk number, or press the S-CO
button.
Parameter