Walking Cos - Panasonic KX-TDE100 Features Manual

1.9.5 Walking COS

1.9.5 Walking COS
Description
A user can enter his extension number and extension personal identification number (PIN) (® 1.28.1 Extension
Personal Identification Number (PIN)) at another extension, to make the following types of call using his Class
of Service, including TRS level, overriding the other extension's Class of Service.
•
Trunk call
•
TIE line call
•
Intercom call
•
External Relay Control (® 1.17.8 External Relay Control)
After performing Walking COS, the following features are also available for the specified extension:
•
Call Forwarding (FWD)/Do Not Disturb (DND) setting (® 1.3.1 Call Forwarding (FWD)/Do Not Disturb
(DND))
•
Incoming Call Distribution Group Log-in/Log-out (® 1.2.2.7 Log-in/Log-out)
•
Absent Message setting (® 1.19.2 Absent Message)
•
Extension Dial Lock (® 1.9.3 Extension Dial Lock)
•
Time Service—Changing the Time Mode (day/lunch/break/night) (® 2.2.4 Time Service)
•
CLIP number setting (CLIP ID) (® 1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/
COLP))
Conditions
•
When a trunk call is made using Walking COS:
–
the Class of Service of the specified extension is applied (® 2.2.1 Class of Service (COS))
–
the budget of the specified extension is applied (® 1.9.2 Budget Management)
–
the Itemised Billing code of the specified extension is applied (® 1.10.1 Automatic Route Selection
(ARS))
–
the specified extension number is recorded on SMDR as the call originator, instead of the extension
number of the actual extension used (® 1.26.1.1 Station Message Detail Recording (SMDR)).
•
Walking COS is also available through DISA. (® 1.17.6 Direct Inward System Access (DISA))
•
Extension PIN
An extension personal identification number (PIN) is required to use this feature. (® 1.28.1 Extension
Personal Identification Number (PIN)) If the wrong PIN is entered three times, the line will be disconnected.
•
This feature can not be used for extensions which the extension being operated is prevented from calling
by Internal Call Block. (® 1.1.2.2 Internal Call Block)
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features—
4.12 [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions—
by Other Extension
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
PT Programming Manual References
[005] Extension Personal Identification Number (PIN)
144 Feature Guide
User Remote Operation / Walking COS / Verification Code
Extension PIN
Extension PIN
Remote Operation