Hands-Free Answerback - Panasonic KX-TDE100 Features Manual

Pure ip-pbx telephone systems
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

1.4.1 Answering Features

1.4.1.4 Hands-free Answerback

Description
A PT user with a speakerphone can talk to a caller without lifting the handset. If the user receives a call while
in Hands-free Answerback mode, a hands-free conversation is established using one of the following methods:
Type
Intercom Call
Trunk Call
Conditions
Hands-free Answerback applies to:
Intercom calls and trunk calls, including calls directed to an incoming call distribution group in UCD or
Priority Hunting distribution method. (® 1.2.2.2 Group Call Distribution)
Hands-free Answerback for Trunk Calls
System programming is required to use this feature.
Hands-free Answerback for Calls From an Extension That Placed a Trunk Call on Consultation Hold
Calls from an extension that placed a trunk call on Consultation Hold can be treated by this feature as
either intercom calls or trunk calls, depending on system programming. If treated as intercom calls, the call
will be established immediately.
When transferring a call from an analogue trunk, users are strongly recommended to perform a screened
transfer, so that the outside caller is not automatically connected to an extension using Hands-free
Answerback when the extension user is absent.
Secret Monitor
The beep tone that the called party hears before answering can be eliminated through system
programming.
Alternate Receiving/Calling Mode (Ring/Voice) Override
Hands-free Answerback overrides the Alternate Receiving mode preset on the telephone and the Alternate
Calling mode from the caller.
Hands-free Answerback with Headset
The Hands-free Answerback feature can also be used with a headset.
PC Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
4.18 [2-9] System Options
→Option 1—
→Option 3—
→Option 4—
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 5—
→Option 6—
Feature Guide References
1.5.3 Intercom Call
86
Feature Guide
Established immediately after a beep tone at the called extension
and the caller hears a confirmation tone.
Established after a specified number of rings, a called extension
hears a beep tone.
PT Operation—Automatic Answer for Call from CO after
Confirmation Tone—Tone 2 : Paged / Automatic Answer
Transfer—Automatic Answer for Transferred Call
Automatic Answer for CO Call
Forced Automatic Answer
Answering Method
Tone Length—Reorder Tone for PT Hands-free

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200Kx-tde600

Table of Contents