Busy On Busy - Panasonic KX-TDE100 Features Manual

1.2.2 Incoming Call Distribution Group Features
The Busy on Busy feature works when the destination for the Intercept Routing—Overflow in an Incoming
Call Distribution Group feature is not assigned in one of the following conditions:
a.
There is no space in the Waiting queue.
b.
The Queuing Time Table is not assigned and there are no extensions logged-in.
[Example of a)]
There are five assistants in a shop. When the answering agent number is "2", and the queuing call number
is "0":
If two of the assistants are talking on the phone, the next caller will hear a busy tone to prevent the caller
from thinking that there is no one in the shop or that the shop is closed.
Conditions
[Intercept Routing—Overflow in an Incoming Call Distribution Group]
•
If the Overflow time expires, and the overflow destination is unavailable:
a.
If the trunk call arrives through the ELCOT/LCOT or T1 (LCOT/GCOT) card:
(1) If the call was once in a queue and an outgoing message (OGM) was sent to it, or the call reached
an incoming call distribution group by using the DISA feature (® 1.17.6 Direct Inward System Access
(DISA)): The line is disconnected.
(2) In all other cases: Redirection is ignored and the Overflow timer activates again.
b.
If the call arrives through another card: Redirection is ignored and the Overflow timer activates again.

[Busy on Busy]

•
If a trunk call arrives through the ELCOT/LCOT or T1 (LCOT/GCOT) card, a busy tone will not be sent to
the caller.
PC Programming Manual References
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings
→Overflow Queuing Busy
→Overflow No Answer
5.15 [3-5-2] Incoming Call Distribution Group—Queuing Time Table
PT Programming Manual References
[625] Destination for Overflow Time Expiration
[626] Overflow Time
[627] Destination When All Busy
[628] Queuing Call Capacity
[632] Maximum Number of Agents
Feature Guide References
1.2.2.4 Queuing Feature
64 Feature Guide