Broadcasting Features; Broadcasting - Panasonic KX-TDE100 Features Manual

1.16.1 Broadcasting

1.16 Broadcasting Features

1.16.1 Broadcasting
Description
A PT user can call multiple parties, assigned as members of a group (broadcasting group), to make a voice
announcement. After one member answers the call, the caller can begin to make an announcement. Other
members' telephones will continue to ring, and each member can listen to the announcement by answering
the call. The caller will hear a confirmation tone every time the members answer the call.
During the announcement, the voices of members will not be heard. However, the caller can allow specific
members to speak, making a conference call. A maximum of four parties can participate in the conference call
simultaneously. This conversation can be heard by the other members.
Broadcasting Group
Eight broadcasting groups can be programmed, and a maximum of 31 members can be assigned to each
group. The available destinations as members of the broadcasting group are as follows:
Wired Extension (PT/SLT/SIP Extension/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
*1 Only available when the networking type of the trunk is assigned as private.
Conference Call
The caller can allow members to speak, and can control the conversation using the following buttons. Pressing
the other buttons during the conversation will be ignored.
Button
DSS
188 Feature Guide
Destination
Establishes a conversation with the corresponding member extension,
or remove the extension from the conversation.
Availability
Function
ü
ü
ü
*1
ü
*1
ü
*1