Panasonic SC-MAX770 Operating Instructions Manual page 9

Cd stereo system
Hide thumbs Also See for SC-MAX770:
Table of Contents

Advertisement

USB at a glance
A
PLAY
[USB[A]
B
REC/PLAY
[USB[B]
USB status indicator
• Play MP3 tracks.
• Record/play MP3 tracks.
Note:
USB status indicator blinks during USB recording.
Note:
USB status indicator lights up when selected.
Recording to a USB device or the
internal memory
Panasonic cannot be held responsible on the action of
consumer to record copyrighted contents which can
cause copyright infringement.
Note:
• All recordings are in ".mp3" format.
• You cannot do recording when you are using random
playback mode.
• Repeat playback mode is off during recording.
• A new album is added each time you do a recording.
• The sequence of album can change after the recording.
• The recordings are kept in a folder named "REC_DATA" in
the USB device or the internal memory.
• The recorded tracks will be sorted in the following order automatically.
- Recorded tracks from Audio CD, radio or external input
(Sorted by recorded)
- Recorded mp3 tracks from CD or USB device (Sorted by alphabet)
Basic recording
1
Select the source you want to record.
Prepare the disc playback mode.
• Record all tracks
Select "OFF PLAYMODE" (
• Record programmed tracks
Program the tracks you want (
playback").
• Record a single track
Select "1-TRACK" (
"Play menu").
Make sure the disc is stopped.
Radio
Tune in to the radio station.
External equipment
Connect and play the equipment (
auxiliary input").
2
Press [MEMORY REC ¥/;] or [USB REC ¥/;] to
start recording.
The name of the folder that keeps the recording is
shown.
• Stop recording
Press [∫]. "WRITING" is shown.
• Pause recording
Press [MEMORY REC ¥/;] or [USB REC ¥/;]
during recording.
Press again to continue recording.
Note:
You can pause during recording from the radio or
AUX
(except in SYNCHRO mode). A track mark is
added every time you pause (
marks").
Note:
• Wait for a few seconds for the system to prepare the USB
device before you start recording.
• USB status indicator blinks during USB recording.
Recording MP3 tracks
You can record MP3 tracks from:
• MP3 disc to
to
to internal memory, or vice versa
"Play menu").
1
Prepare the source you want to record.
"Program
• Record all tracks
Select "OFF PLAYMODE" (
• Record programmed tracks
Program the tracks you want (
playback").
• Record specified album or track
Select "1-ALBUM" or "1-TRACK" (
2
Press [MEMORY REC ¥/;] or [USB REC ¥/;] to
"Using the
start recording.
Example: Recording an album from the USB device
Percentage of the recording process
• Stop recording
Press [∫].
Recording stops at the last fully recorded track in
the album.
For example, if you stop recording during the fourth
track, only the first three tracks are recorded.
"Adding track
"NO FILE RECORDED" is shown if no track is
recorded.
Note:
• Some tracks can use a longer time to record.
• Some tracks cannot be recorded because of the condition
of the source.
• The recorded folder name may be different from the
original folder because of the auto rename function.
or internal memory
or internal memory
"Play menu").
"Program
"Play menu").
to the internal memory.
Album being recorded
9

Advertisement

Table of Contents
loading

Table of Contents