Using A Microphone; Using The Auxiliary Input - Panasonic SC-MAX770 Operating Instructions Manual

DJ effects
By main unit only
You can use the DJ effect function to add the sound
effects.
1
Press [DJ EFFECT].
2
Press [1] to [6] to select the desired DJ effect.
• [1] PHASER
Add space and dimension to the sound.
• [2] FILTER
Enhance or filter specific ranges of the sound.
• [3] SOUND CHOPPER
Cut off the sound periodically.
• [4] ELECTRO ECHO
Add digital echo to the sound.
• [5] PITCH SHIFTER
Adjust the keys of the sound.
• [6] HARMONIZER
Add notes to the sound to create harmony.
To cancel, press the button again.
3
Turn [MULTI CONTROL] to select the desired
setting.
To cancel the DJ effect
Press [DJ EFFECT].
16

Using a microphone

Preparation
Decrease the volume of the system to its minimum
before you connect or disconnect a microphone.
1
Connect a microphone (not supplied) to the
microphone jack.
Plug type: ‰ 6.3 mm monaural
2
Turn [MIC VOL, MIN/MAX] on the main unit to
adjust the volume of the microphone.
3
If you want to sing with the background music.
Play the music source and adjust the volume of
the system.
Note:
• If a strange noise (howling) is emitted, move the
microphone away from the speakers, or decrease the
volume of the microphone.
• When you do not use the microphone, disconnect it from
the microphone jack, and decrease the volume of the
microphone level to "MIN".
• This system cannot record from microphone.

Using the auxiliary input

Preparation
• Disconnect the AC power supply cord.
• Switch off all equipment and read the appropriate
operating instructions.
Note:
Components and cables are sold separately.
To connect a portable audio equipment etc.
You can play music from a portable audio equipment.
Preparation
Switch off the equalizer (if any) of the portable audio
equipment to prevent sound distortion.
Decrease the volume of the system and the portable audio equipment
before you connect or disconnect the portable audio equipment.
1
Connect the portable audio equipment to
AUX IN 2.
Plug type: ‰ 3.5 mm stereo (not supplied)
2
Press [RADIO/EXT-IN] to select "AUX 2".
3
Play the portable audio equipment.
To connect a VCR, DVD player etc.
You can connect a VCR, DVD player etc. and listen to
the audio through this system.
Rear panel of this main unit
DVD player (not supplied)
Audio cable
(not supplied)
1
Connect the external equipment.
2
Press [RADIO/EXT-IN] to select "AUX 1".
3
Play the external equipment.
Note:
• If you want to connect equipment other than those
described, refer to the audio dealer.
• Sound distortion can occur when you use an adapter.