Chapter 2: Installation and Maintenance
Installing a G10 PSTN Gateway
!
CAUTION:
If you have any 4610SW/4621SW IP telephones to install, install them first.
CAUTION:
The procedures in this section refer to the ports and jacks on the rear panel of the G10 PSTN
gateway (see
To connect a G10 PSTN gateway to a 802.3af PoE LAN, see
●
gateway to a 802.3af PoE LAN on page
To connect a G10 PSTN gateway to a LAN that is not 802.3af PoE enabled, see
●
connect a G10 PSTN gateway to a LAN that is not 802.3af PoE enabled on page
Note:
In addition, the installation procedures reference a customer-supplied analog
Note:
phone, a customer-supplied Cat5 Ethernet cable, and customer-supplied
telephone cords.
Figure 3: G10 PSTN Gateway Rear Panel
12V - - -1.0A
12V-1.0A
adaptor
Tip:
If you have trouble with a G10 PSTN gateway after you install it, refer to the
Tip:
"Troubleshooting" chapter of the Avaya one-X Quick Edition System
Administrator Guide to resolve the problem.
16
Avaya one-X Quick Edition Release 1.0.0 G10 PSTN Gateway Installation Guide
Figure 3
below). Two procedures are provided:
LAN
Reset
LAN port
17.
L4
External
Music
Reset
Paging
on Hold
L4
Music on
Hold
External
Paging
To connect a G10 PSTN
L3
L2
L1
L3
L2
L1
Analog Telephone
Bypass port
To
17.
Ground Lug
March 2006