Obtaining The Extension Number And/Or Ip Address Of A G10 Pstn Gateway; Resetting A G10 Pstn Gateway To Factory Settings - Avaya one-X G10 PSTN Installation Manual

Table of Contents

Advertisement

Obtaining the Extension Number and/or IP Address of a G10 PSTN
Gateway
Every G10 PSTN gateway has an extension number; however, the number is not displayed in
the one-X Quick Edition Corporate directory and cannot be called.
If your network has more than one G10 PSTN gateway and you are not sure which extension
number has been assigned to a particular G10 PSTN gateway, here is a way to determine both
the extension number and IP address of the G10 PSTN gateway.
To learn the extension number and IP address of a G10 PSTN gateway
1. Go to the G10 PSTN gateway and record its MAC address (see the label on the bottom of
the G10 PSTN gateway).
2. Using any 4610SW/4621SW IP telephone connected to the network, press the Options
(
) button below and to the right of the display area.
3. Select Options on the Main menu, or press 1 on the dialpad.
4. Select System Options on the Options menu, or press 2 on the dialpad.
5. When you are prompted to enter a password, press the keys on the dialpad to enter the
administration password.
6. Select the Done softkey.
7. Select Gateways on the System Options menu, or press 5 on the dialpad.
8. One at a time, select the Line/Feature ( ) button beside each gateway entry, and then
select Details to view the associated MAC addresses. When you locate the gateway that
matches the MAC address, note its extension number and if required, its IP address.

Resetting a G10 PSTN Gateway to Factory Settings

There are two reasons for resetting a G10 PSTN gateway to factory settings. Reset the G10
PSTN gateway when:
the device is operational but you want to remove the G10 PSTN gateway from the system,
or
you want to move the G10 PSTN gateway to a different one-X Quick Edition network.
You can reset and power cycle a G10 PSTN gateway as follows. These steps reset the G10
PSTN gateway to factory settings. The procedures assume that no telephone cords (PSTN
lines) are connected to the FXO ports on the rear panel of the G10 PSTN gateway.
Avaya one-X Quick Edition Release 1.0.0 G10 PSTN Gateway Installation Guide
Configuring a G10 PSTN Gateway
March 2006
19

Advertisement

Table of Contents
loading

Table of Contents