Sensor Pairing
What is pairing?
Pairing is the process of matching
sensors, like your heart rate
monitor and GSC10, with your
Edge 305. This process occurs
automatically when you turn on
the Edge and only takes a few
seconds when the sensors are
on and functioning correctly.
Once paired, your Edge will only
receive data from your sensor.
Edge Owner's Manual
How does it work?
Upon power up, the Edge
will automatically scan for the
sensors you have enabled during
intial setup (see
accessories setup (see
Each sensor has a unique ID.
The Edge learns and saves this
unique ID while pairing the first
time. The next time you turn the
Edge on, it will only pair with the
unique sensor ID. If the Edge
does not find the sensor, you
should restart the scan to find
your sensor ID.
A
PPENDIX
page
12) or
page
58).
73