Garmin Edge 205 Owner's Manual page 18

G S
ETTING TARTED
5. Press the Reset button on the
GSC10. The LED light turns
red, then green. Pedal to test
the sensor alignment. The
red LED blinks each time the
crank arm passes the sensor,
and the green LED blinks
each time the wheel magnet
passes the sensor arm.
pedal
magnet
18
NOTE: The LED blinks for the first
60 passes after a reset. Press
Reset again if you require additional
passes.
6. When everything is aligned
3
spoke magnet on wheel
and working correctly, tighten
the cable ties, sensor arm,
and spoke magnet.
spoke
magnet
sensor arm
indication
line
Edge Owner's Manual