Sony PMW-500 Operation Manual page 182

Solid-state memory camcorder
Hide thumbs Also See for PMW-500:
Table of Contents

Advertisement

WARNING indicator Warning sound
Problem
The fan does not rotate
when started.
WARNING indicator Warning sound
Problem
Restoration is required
because the media was
removed while the
camcorder was in
recording standby
mode of Clip
Continuous Rec (see
page 82).
WARNING indicator Warning sound
Problem
Power to the external
device connector was
removed because
overcurrent was
detected on the
connector. (Other
operations are not
affected.)
1) (B) for the card in slot B
2) B for a HDD connected to slot B
182
Operation Warnings
Operation in the recorder
module
Operation in the recorder
module
Recording continues.
Operation in the recorder
module
Recording continues.
Tally/REC
Battery remaining
Action to take
Avoid use under high temperature conditions.
Power the camcorder off and contact a Sony
service representative.
Tally/REC
Battery remaining
Action to take
Insert again the media which was removed and
restore it (see page 70).
Tally/REC
Battery remaining
Action to take
Power the camcorder off and remove the Wi-Fi
adapter or USB flash drive that is connected to
the external device connector.

Advertisement

Table of Contents
loading

Table of Contents