Sony PMW-500 Operation Manual page 139

MAINTENANCE
Menu items Sub-item
WRR Setting WRR Valid CH Sel
Makes settings related
to the wireless tuner.
WRR CH Select
WRR Delay Comp
TX
TX Audio Peak
TX Input Level
TX ATT Level
TX LCF Frequency
TX System Delay
Settings
All/CH1
TX1/TX2
On/Off
---
---/Peak
---/Mic/Line
---
---
Auto/0.0ms to 8.0ms
Description
Selects whether to enable channels 1
and 2 of the wireless receiver (All)
or channel 1 only (CH1).
Specifies the target channel for other
sub-items.
TX1: Channel 1
TX2: Channel 2
Enables (On) or disables (Off) delay
compensation for wireless audio
input. (When On is selected, the
audio in all E-E output is delayed by
about 8 ms.)
Displays the name of the transmitter
whose signals are being received on
the channel selected by WRR CH
SELECT.
Displays whether the AF level of the
transmitter whose signals are being
received on the channel selected by
WRR CH SELECT are over peak.
Displays whether the input level of
the transmitter whose signals are
being received on the channel
selected by WRR CH SELECT is
set to microphone (Mic) or line
(Line).
Sets the ATT level of the transmitter
whose signals are being received on
the channel selected by WRR CH
SELECT. (The setting range varies
depending on the transmitter.)
Sets the low cut filter frequency of
the transmitter whose signals are
being received on the channel
selected by WRR CH SELECT.
(The setting range varies depending
on the transmitter.)
Specifies the amount of audio delay.
Auto: Automatically adjusts the
amount of delay so that the
delay in the audio received
from the wireless transmitter is
zero.
0.0ms to 8.0ms: Sets the amount of
anticipated wireless system
delay, for cases in which
several wireless systems are
being used over a devices such
as an audio mixer.
Menu List 139