Sony PMW-500 Operation Manual page 144

MAINTENANCE
Menu items
Auto Iris2
Makes settings related
to auto iris.
Genlock
Makes settings related
to genlock.
144 Menu List
Sub-item Settings
Iris Window 1/2/3/4/5/6/Var
Iris Window Ind On/Off
Iris Level –99 to ±0 to +99
Iris APL Ratio –99 to ±0 to +99
Iris Var Width 40 to 500 to 999
Iris Var Height 70 to 500 to 999
Iris Var H Position –479 to 0 to +479
Iris Var V Position –464 to 0 to +464
Iris Speed –99 to ±0 to +99
Clip High Light On/Off
Genlock On/Off
H Phase(HD) –999 to ±0 to +999
H Phase(SD) –99 to ±0 to +99
Reference Internal/Genlock
Description
Selects the type of iris detection
window.
Var: Variable
Turns on or off the function that
displays a frame marker for the auto
iris detection window.
Adjusts the level of the auto iris
target value.
Adjusts the mix ratio of auto iris
detection peak value and average
value (available when OPERATION
>TLCS >Mode is set to [Standard]).
Adjusts the width of the detection
window when the setting of Iris
Window is VAR.
Adjusts the height of the detection
window when the setting of Iris
Window is VAR.
Specifies the horizontal position of
the detection window when the
setting of Iris Window is VAR.
Specifies the vertical position of the
detection window when the setting
of Iris Window is VAR.
Specifies the control speed (speed of
reaction to changes in the video).
(Larger values specify quicker
reaction times.)
Turns on or off the function that
disregards highlights and forces a
flatter reaction to high luminance.
Turns the genlock function on or off.
Specifies the H phase of HD output
when genlock is enabled.
Specifies the H phase of SD output
when genlock is enabled.
Displays the type of reference signal
used by the camcorder.