Sony PMW-500 Operation Manual page 126

OPERATION
Menu items
Clip
Make settings for clip
name or clip
management.
Note
Do not assign clip
names that begin with
the "." (period)
symbol.
Clips with names in
which the first
character is "." cannot
be viewed on the
application software
for computers.
126 Menu List
Sub-item Settings
Number Set 00001 to 99999
Name Display Off/Viewfinder/LCD
Status/Both
Update Media<A>/Media<B>
Description
Specifies the initial value of the numeric
part (five digits) of clip names (The
numeric part of clip names is limited to
four digits number if Auto Naming is
set to other than [Plan] or if planning
metadata is invalid though Auto
Naming is set to [Plan].)
Selects whether or not to display the
name of the next clips to be recorded (in
E-E mode), and where to display the
name.
Off: Do not display
Viewfinder: Display on the viewfinder
screen
LCD Status: Display on the LCD
monitor (with the display mode se
to STATUS)
Both: Display on both the viewfinder
screen and the LCD monitor
Note
If a clip with the same name as the next
clip to be recorded already exists on the
recording media, then immediately after
recording begins the clip name is displayed
with a different serial number (when the
selection is other than Off).
Updates the management files on the
media in the selected slot (execute by
selecting Execute).