Sony PMW-500 Operation Manual page 141

MAINTENANCE
Menu items Sub-item
Camera Config Rec Tally Blink
Makes settings related
to various camcorder
operations.
Rec Review
HD SDI Remote I/F Off/Chara/G-Tally/
Color Bars Select
User Menu Only
RM Common
Memory
Settings
On/Off
3sec/10sec/Clip
R-Tally
ARIB/100%/75%/
SMPTE
On/Off
On/Off
Description
Turns warning flashes by the
TALLY indicator on or off. The
warnings alert you an almost
exhausted battery pack or low
remaining media capacity.
Selects the recording review time.
Clip: Review all of the most
recently recorded clip.
Selects whether to use the function
that enables recording control from
this camcorder of an external device
connected to the HD/SD SDI OUT
connector (HDSDI output). When
the function is used, also selects the
indication that shows whether the
external device is recording.
Off: Do not use the remote
recording control function.
Chara: Indicate by the external
device control indication on the
viewfinder screen.
G-Tally: Indicate by the green tally
indicator in the HDVF series
viewfinder or green tally
indicator on the screen of the
CBK-VF01 viewfinder.
R-Tally: Indicate by the recording/
red tally indicators in the
HDVF series viewfinder or the
special recording mode/
operation status indication on
the screen of the CBK-VF01
viewfinder.
Selects the color bar type.
Selects whether to display the
USER menu only (On) or display
the menu list (Off) when the
camcorder enters the menu mode.
Selects whether to share (On) or not
share (Off) settings between times
when a remote control unit is
connected and times when the
camcorder is used locally.
Note
When a remote control unit is
connected, this setting is disabled.
Menu List 141