Sony PMW-500 Operation Manual page 157

Assignable switch setting Function
Color Temp SW 6300K
Electrical CC
CC5600K
Clip Continuous Rec
Slot Select
Digital Extender
Adjust the white balance with a 6300K preset value.
Function that switches the electrical CC filter (3200K/
4300K/5600K/6300K) applied to white balance
adjustment values.
Each press of the switch or button switches in the order
3200Kt4300Kt5600Kt6300K.
These can also be applied from a menu (apply with
Electrical CC<A><B><C><D>).
Note
This function is not available when Maintenance >White
Filter >ND Filter C.Temp in the setup menu is set to On.
If you set ND Filter C.Temp to On after assigning the
function, the assignable switch ceases to function.
Apply a 5600K electrical CC filter to white balance
adjustment values.
Turn the Clip Continuous Rec mode on or off.
When both slots A and B have recording media inserted
in them, select the media to use.
Turn the screen magnification function on or off when
the optional CBK-HD02 SDI/COMPOSITE Input and 50
Pin Interface is installed.
State when camcorder
is next powered on
Setting retained
Setting retained
Setting retained
Setting not retained
—
Setting not retained
Assigning Functions to Assignable Switches 157