Panasonic Workio DP-C262 Function Manual page 69

Key Operator
No. Parameter
0-14 14 Printer Language
15-29 18 AppleTalk
19 AppleTalk Zone Name
20 AppleTalk Printer Name
21 AppleTalk Type Name
22 NetWare
23 NetWare Frame Type
Comments
Set a printer language.
• Auto
The machine prints received
data by automatically judging
its printer language.
• PCL
The machine prints received
data by regarding its printer
language as PCL.
• PS
The machine prints received
data by regarding its printer
language as PostScript.
When the optional Printer
Controller Module (for Adobe
® ™
PostScript 3 )is installed.
Set "On" to use AppleTalk.
When the optional Printer
Controller Module (for Adobe
® ™
PostScript 3 )is installed.
Set the AppleTalk zone name.
When the optional Printer
Controller Module (for Adobe
® ™
PostScript 3 )is installed.
Set the AppleTalk printer
name.
When the optional Printer
Controller Module (for Adobe
® ™
PostScript 3 )is installed.
The machine detects and
display the AppleTalk Type
Name on the Touch Panel.
Apple Talk Type Name is
displayed only, but cannot
be set.
When the optional Printer
Controller Module (for Adobe
® ™
PostScript 3 )is installed.
Set "On" to use NetWare.
Set the NetWare frame type.
No. 18 to 23
After setting, turn themachine's power switch
Off, and then On again.
Selective Item
Auto, PCL, PS
®
Off, On
®
Up to 31 characters
®
Up to 31 characters
®
®
Off, On
802.3, 802.2, Ether-II,
SNAP
Standard
Setting
Auto
On
Off
802.2
69