How To Receive Data From A Personal Computer; How To Transmit Data To A Personal Computer ,Sion - Seiko RC-4000 Instruction Manual

2. How to receive data from a personal computer
(1) Connect the RC-4000/4400 to a personal computer using a wrist
plug and connecting cable as shown below (for attachment of the
wrist plug, refer to "Wrist Plug" and "Connecting Cable" on pages
31 and 32).
Connecting cable
(2) Switch the RC-4000/4400 to "DATA IN (H)" or
"DATA IN (L)" by pressing button A. (H and L show
transfer speed. Refer to "Precautions for Data Trans-
mission Mode".)
(3) When signal is input from your personal computer, a
beep sound is heard and the data transfer automatical-
ly starts.
22
12-06
•< m
MDN
59
IQ:DB
DRTR IN (H)
(4) When data transfer is carried out, another beep sound is heard and RC-4000/4400 display
shows the first label transferred.
Refer to your software's Instruction Manual for details.
3. How to transmit data to a personal computer
(1) Connect your personal computer to the bi-directional
adaptor and the RC-4000/4400 to the adaptor, as
shown in the illustration below. (For attachment refer
to "Bi-directional Adaptor" on page 34.) Press button A
to change the display to "DATA IN (H)" or "DATA IN
(L)".
Bi-directional adaptor
23