How To Input Memo Data; How To Set Schedule Alarm - Seiko RC-4000 Instruction Manual

When all data is cleared, the label will be displayed in the top left corner in the following
order: M1, M2, M3, S.A and W.A. For changing to your own title, refer to "How to Input
Labels."
You can input any desired data on your RC-4000/4400, by following the procedures
below. Be sure that all the data is cleared because the following procedures are for the all-
cleared status. When all the data is cleared, time setting must be done.
1-4 How to input Memo Data
Each data item is made up of 2 lines of 12 characters — 24 characters in all.
(1) Press button C to display the label Ml.
(2) Display the first blank page by pressing button E.
(3) The Data Input Mode is achieved by pressing button B. The first position in the upper
left corner will start flashing.
(4) Pressing button D or E will change character in the sequence shown below. When the
character you wish to set appears, press button C. To advance one space, simply press
button C.
C
0 - 9 A ~ Z »
# $ % &
( )
*
+
-
/
¥ =
-
7
3
12
(5) Continue inputting of data by repeating operation (4).
(6) When your data is input, press button B to lock the data.
(7) Scroll to the next blank page by pressing button E. Then repeat operations (3) and (4)
(8) Press button A to revert to the Time Display Mode.
S.H
ID:DB
©
1-5 How to set Schedule Alarm
(1) Press button C until "S.A" appears
on the display.
(2) Press button E to display the first
blank page.
(3) Press button B for setting mode —
the alarm symbol will start flashing.
Press button E to select alarm on/off.
(4) Press button C to start the first time element flashing.
* Even if the alarm symbol in the individual S.A Mode is
on, alarm will not operate if the alarm symbol in the
Time Display Mode is off.
* The setting location changes in the following sequence. A
r--Month "-Day "Hour (AM/PM) •• Minute-
' 12 characters for the upper row message
13