How To Change And Add Data; Alarm Function; Data Input With A Personal Computer - Seiko RC-4000 Instruction Manual

1-8 How to change and add data
Data can be changed and added using character input and line delete functions.
(1) Display the data, you wish to edit by pressing buttons C, D and E.
(2) Press button B to change to the Data Input Mode.
(3) Data edit can be carried out in the following manner.
* To change data, press button C to select the cha-
racter input location and choose the character
by pressing buttons D and E. When your desired
character appears, press button C to set.
* To add data, press button C to select the blank
location. Then press buttons D and E to choose the
character. When your desired character appears,
press button C to set.
* To delete data, repeat (1), (2) and press buttons
D and E at the same time. The entire row will
disappear.
(4) Press button B to lock.
Note: Line delete can be used only when Memo Mode
is displayed. In the Alarm Mode, characters can be
deleted but numerals cannot. Also the Labels cannot
be deleted.
16
12-06 tlOM
ilm S9
IDBB j
g^g
3-B
,C
-E
123-4567
1-9 Alarm function
How to stop the alarm sounding
* The alarm will sound when the screen is in either the Time Display Mode or Data Mode.
You can stop the alarm sounding by pressing any button.
* When the alarm sounds the complementary data message will be displayed and will remain
after the alarm has stopped.
•When Schedule and Weekly Alarms are set for the same time the Schedule Alarm will
sound.
* If either the Schedule Alarm or Weekly Alarm have two settings for the same time, the
alarm to be set first will sound first.
Alarm symbol on/off
* Alarm symbols will appear in the
Time Display Mode and the
Schedule/Weekly Alarm Mode.
Alarms are operable only when
both of them are set to on.
Alarm Mode; on
Alarm Mode: off
Time Display
Mode: on
Operates
Will not operate
Time Display
Mode: off
Will not operate
Will not operate
2. Data input with a personal computer
When used with a personal computer, data can be transferred from the computer to the
RC-4000/4400. You can also change and add to the data on your RC-4000/4400. (Refer to
the previous sections for the operational procedure). In addition, you can set the data con-
struction and the number of data labels as you desire.
17