Safety Precautions - SATO MB400i Operator's Manual

Use of this product near microwave and/or other wireless LAN equipment, or where static
electricity or radio interference is present, may shorten the communication distance, or even
disable communication.
"Bluetooth" is a trademark of Bluetooth SIG, Inc., USA., and is used herein under license

SAFETY PRECAUTIONS

This section outlines the safety precautions needed for safe operation of the printer. Make sure
to read the precautions carefully before using the printer.
Symbols used in this manual:
The following symbols or markings are used in this manual and on the printer so that you can
properly use the printer, and to prevent any damage to property, harm or injury to yourself and
others.
SYMBOL
MB400i/MB410i Operator Manual
Table 2-1, Symbols
MEANING
All safety symbols are enclosed by a circle or triangle. A black
circle is for an action you should do. A white circle with a bar
across it represents an action you should not do. A triangle
indicates that care is needed for that action, to avoid potential
hazards.
This symbol comes with the word Warning or Caution to alert
the user to be careful about an action to prevent (possible)
damage or injury.
This symbol alerts the user about the (possible) risk of electrical
shock if care is not observed when performing a certain action.
This symbol indicates that the user should remove the AC cord
by pulling the plug and not the cord.
This symbol indicates that the user should NOT attempt to dis-
mantle or service the product.
Unit 2: Overview
.
Page 2-3