Normal Mode; Test Print Mode - SATO MB400i Operator's Manual

Unit 4: Operation and Configuration

NORMAL MODE

Note: The Battery indicator (all models except
OFFLINE. During the Standby state, the printer resumes normal operational status upon sensing any
incoming data or pressing of the buttons.

TEST PRINT MODE

1. Enter Test Print mode as shown, by using the FEED and POWER buttons.
2. In order to start and stop Test Printing, press the FEED button.
Page 4-28
Table 4-2, STATUS LED behavior in Normal Mode
Operational STATUS
State LED
START OF Orange
PRINTING
ONLINE Green
OFFLINE OFF
STANDBY Green
(after 5
seconds of
inactivity)
WLAN model) remains lit even when the printer is
LED Action
Steady
Steady
NA
Blinks every
4 seconds
MB400i/MB410i Operator Manual